Storlek/Attribut: 44 teeth Colour: orange Factory Racing: USED BY FACTORY RACING Surface (PowerParts): Anodized Material (PowerParts): Aluminium Number of teeth: 44 teeth Lagerstatus:
Storlek/Attribut: 45 teeth Colour: orange Factory Racing: USED BY FACTORY RACING Surface (PowerParts): Anodized Material (PowerParts): Aluminium Number of teeth: 45 teeth Lagerstatus: 2026-07-22
Storlek/Attribut: 46 teeth Colour: orange Factory Racing: USED BY FACTORY RACING Surface (PowerParts): Anodized Material (PowerParts): Aluminium Number of teeth: 46 teeth Lagerstatus:
Storlek/Attribut: 48 teeth Colour: black Factory Racing: USED BY FACTORY RACING Surface (PowerParts): Anodized Material (PowerParts): Aluminium Number of teeth: 48 teeth Lagerstatus:
Storlek/Attribut: 49 teeth Colour: black Factory Racing: USED BY FACTORY RACING Surface (PowerParts): Anodized Material (PowerParts): Aluminium Number of teeth: 49 teeth Lagerstatus:
Storlek/Attribut: 50 teeth Colour: black Factory Racing: USED BY FACTORY RACING Surface (PowerParts): Anodized Material (PowerParts): Aluminium Number of teeth: 50 teeth Lagerstatus: 2026-07-22
Storlek/Attribut: 51 teeth Colour: black Factory Racing: USED BY FACTORY RACING Surface (PowerParts): Anodized Material (PowerParts): Aluminium Number of teeth: 51 teeth Lagerstatus:
Storlek/Attribut: 52 teeth Colour: black Factory Racing: USED BY FACTORY RACING Surface (PowerParts): Anodized Material (PowerParts): Aluminium Number of teeth: 52 teeth Lagerstatus:
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special.
Specifically suited to extreme conditions: for more air, better cooling and maximum power. Indispensable not only at the Erzberg or the Extreme Lumezzane.
"This anti-hopping clutch is a must for every ambitious rider. The APTC is a worldwide patented slipper clutch characterised by the outer clutch hub being divided in two, with the two components connected by a clutch spring. This complex mechanism, in which helical gearing provides for additional friction, has been developed to prevent the clutch from slipping. With the throttle open, this system generates additional pressure on the clutch plates; the clutch can slip on disengaging. The APTC with special pressure plate guarantees maximum rear wheel grip when accelerating and the anti-hopping effect when changing down. With optimum ride control, it is possible to ride faster into and out of the curves, thanks to the APTC. In contrast to all other slipper clutches on the market, this system only requires very light actuation of the clutch (approx. half the force is necessary). Furthermore, vibration of the clutch lever is prevented. Hence, this system means much less work for the rider, sparing him or her the discomfort of cramp in the lower arm."
Pris 12815:-
Handlebars/instruments/electrics Grips
Grip donut set
105:-
U6951716
Coated neoprene ring
Simply pulled over the grips
Optimum protection against blisters on the thumbs with these coated neoprene rings.
EGENSKAPER
Colour
orange
Pris 105:-
GUMMIHANDTAG GRÅ MEDIUM
160:-
54802021100
Developed according to the requirements of our factory drivers
Less stress when riding
Objective: comfort AND safety
Ergonomic contour adapted to the shape of the hand for maximum comfort
There's racing experience here as well! Practical tyre lever set, consisting of
3 x short version 51012092100
3 x long version 51012093100
EGENSKAPER
Colour
black
Material
Steel
Pris 910:-
Fork seal doctor
345:-
A54029994500
This clever tool is a must for every motorcycle toolbox
With it, you can remove dirt from your fork seals effortlessly
No matter whether it's in the garage or directly at the racetrack this tool extends the life of your seals many times over
For all 48 mm forks
EGENSKAPER
Colour
black
Material
Plastic
Pris 345:-
Measuring cup
105:-
A54029963000
With scaling for both the fluid level and different mixture ratios. Perfect for changing the oil and for preparing larger quantities of 2-stroke mixture in the canister. Simple handling thanks to the ergonomic design.
EGENSKAPER
Colour
transparent
Material
Plastic
Volume
1
Pris 105:-
Mud removal tool
95:-
A54029935000C1
Use this to remove the dirt from your last mud battle with ease!
A motorcycle grip rubber (not included) can be fitted to the grip.
EGENSKAPER
Colour
black
Material
Plastic
Pris 95:-
Oil bottle
105:-
7802906500004
Perfect for all 2-stroke riders on the move. The small bottle fits in your tool bag or jacket. Capacity 250 ml, with scaling for different mixture ratios (1 : 40 / 2.5 %; 1 : 50 / 2 %; 1 : 60 / 1.7 %; 1 : 80 / 1.25 %)
On this spoke wrench, the torque is preset at 6 Nm. This prevents over-tightening of the spoke nipples. Too much torque when tightening the spoke nipples is the most frequent cause of broken spokes. Wrench size 6.8 mm.
Pris 2355:-
TRATT ORANGE
105:-
59029050000
Funnel specially developed for KTM motorcycles. Diameter (small and large) optimized to suit the filler neck; special groove for optimum ventilation.
EGENSKAPER
Colour
orange
Material
Plastic
Pris 105:-
Tyre pressure gauge
425:-
77329068000
Comfortable and easy to use
Fits all standard valves. Pressure display in bar or psi
Integrated pressure release valve for accurate pressure adjustment
Easy to use! Measuring range 0 bar – 4 bar. Clamping head rotatable through 90° on a flexible stainless steel feed line. The valve shaft is therefore accessed easily and quickly. Very accurate measurements by way of a durable internal membrane. Internal pressure is reduced after use by a relief valve (push button).
Pris 320:-
Wheel alignment gauge
535:-
58310025100
The ideal tool for checking perfect wheel position when tensioning the chain.