- Orange with KTM logo
- 50 mm wide & 99 m long
Pris 84:-
- Specially developed for use in motocross
- No O- or Z-rings > minimum loss of power and good durability
EGENSKAPER
Number of chain links
118
chain pitch
520
Colour
black
RESERVDELAR
KEDJELÅS CLIPS 520 STD
50310166000
Pris 910:-
- Specially designed for the challenges of off-road use
- Significantly longer durability
- Made of high-strength aluminum
- The right combination of look, style, and performance
- The lightest Renthal Sprocket on the market
- Provide maximum power transfer and long-life due to advanced tooth profile and perfect concentricity
- Combination of a high strength base material and exceptionally hardwearing surface
Pris 750:-
- Specially designed for the challenges of off-road use
- Significantly longer durability
- Made of high-strength aluminum
- The right combination of look, style, and performance
- The lightest Renthal Sprocket on the market
- Provide maximum power transfer and long-life due to advanced tooth profile and perfect concentricity
- Combination of a high strength base material and exceptionally hardwearing surface
EGENSKAPER
Colour
black
Factory Racing
USED BY FACTORY RACING
Surface
Anodized
Material
Aluminium
Number of teeth
44 teeth
Pris 750:-
- Teeth made of high-strength steel, for an extra long service life
- Aluminum center section, reduces unsprung masses
- Permanently joined together with high-strength rivets
- At least three times longer service life than other aluminum rear sprockets
- 50 % lighter than steel rear sprockets
- Longer service life of the entire drivetrain kit
EGENSKAPER
Colour
black
Surface
Anodized
Material
Aluminium
Number of teeth
46 teeth
Pris 745:-
- CNC milled from high-strength aluminum
- Elegant anodised surface
EGENSKAPER
Colour
orange
Surface
Anodized
Material
Aluminium
Pris 105:-
DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminum and therefore not only look good, they also withstand the toughest treatment? With the anodized aluminum components in the original factory look from the PowerParts range, you can turn your KTM into something very special.
EGENSKAPER
Colour
orange
Surface
Anodized
Material
Aluminium
Pris 350:-
- Improves clutch performance and durability
- Hinson-typical surface treatment for significantly improved robustness compared to the standard part
- Very clean running of the clutch, which leads to reduced heat development when the clutch is pulled
- Can be installed in the standard clutch or in combination with other Hinson clutch components
- CNC milled from high-strength aluminum
- Improves heat dissipation
EGENSKAPER
Colour
black
Factory Racing
USED BY FACTORY RACING
Surface
Anodized
Material
Aluminium
Pris 4290:-
"This anti-hopping clutch is a must for every ambitious rider. The APTC is a worldwide patented slipper clutch characterised by the outer clutch hub being divided in two, with the two components connected by a clutch spring. This complex mechanism, in which helical gearing provides for additional friction, has been developed to prevent the clutch from slipping. With the throttle open, this system generates additional pressure on the clutch plates; the clutch can slip on disengaging. The APTC with special pressure plate guarantees maximum rear wheel grip when accelerating and the anti-hopping effect when changing down. With optimum ride control, it is possible to ride faster into and out of the curves, thanks to the APTC. In contrast to all other slipper clutches on the market, this system only requires very light actuation of the clutch (approx. half the force is necessary). Furthermore, vibration of the clutch lever is prevented. Hence, this system means much less work for the rider, sparing him or her the discomfort of cramp in the lower arm."
Pris 12815:-
- Coated neoprene ring
- Simply pulled over the grips
EGENSKAPER
Colour
orange
Pris 105:-
- Uncompromising race look
- Extremely light
- Open design
- 2-component plastic handguard
- Black middle section = maximum strength for optimum protection
- Colored top and bottom parts = highly flexible under the roughest conditions
EGENSKAPER
Colour
black
Material
Plastic
ANVÄNDARMANUAL / DOKUMENT
Pris 525:-
To assemble the hour counter on the triple clamp.
REKOMMENDERADE PRODUKTER
78112920000
Pris 145:-
- Made of high-strength aluminum
- Improved braking performance
EGENSKAPER
Colour
black
Surface
Anodized
PASSAR TILL
Flame brake disc
78909960000
ANVÄNDARMANUAL / DOKUMENT
Pris 1065:-
- For tank and carburetor bleeding
- Gasoline resistant
- Can only be used for bleeding purposes
- Cannot be used as a connection between tank and carburetor!
EGENSKAPER
Colour
orange
Pris 275:-
- Testing, charging and keeping batteries fresh
- Fully automatic and economical battery charging by means of programmed charge characteristic
- Short-circuit protection
- Reverse polarity protection
- Can be used for several types of batteries (Pb, LiFePo4)
- Charging with a specific power control program
- Trickle charge during diagnostic or flashing the vehicle
- Recovery mode for low battery voltage (BMS, battery management system)
- Optimizes battery performance and service life
- Including power supply cable type EU
EGENSKAPER
not available in
Vereinigte Arabische Emirate
REKOMMENDERADE PRODUKTER
A61029974144
79629974010
RESERVDELAR
79629974020
ANVÄNDARMANUAL / DOKUMENT
Pris 2685:-
- The Bead Buddy acts as your third hand when fitting tires
- Holds the tire in the tire bed, thereby making tire fitting much easier
- Simply hook it into the spokes and away you go Particularly recommended for tire fitting with mousse.
EGENSKAPER
Colour
orange
Surface
Anodized
Material
Aluminium
Pris 239:-
100x, length:20 cm.
EGENSKAPER
Colour
orange
Material
Plastic
Pris 105:-
- Easy handling and operation
- More safety
- Less wear on the cord
- Made of high quality material
- Cable not included
EGENSKAPER
Colour
black
Diameter
400 mm
Pris 210:-
5/8 x 1/4".
EGENSKAPER
chain pitch
520
Pris 295:-
- This clever tool is a must for every motorcycle toolbox
- With it, you can remove dirt from your fork seals effortlessly
- No matter whether it's in the garage or directly at the racetrack this tool extends the life of your seals many times over
- For all 48 mm forks
EGENSKAPER
Colour
black
Material
Plastic
Pris 345:-
With scaling for both the fluid level and different mixture ratios. Perfect for changing the oil and for preparing larger quantities of 2-stroke mixture in the canister. Simple handling thanks to the ergonomic design.
EGENSKAPER
Colour
transparent
Material
Plastic
Volume
1
Pris 105:-
- Use this to remove the dirt from your last mud battle with ease!
- A motorcycle grip rubber (not included) can be fitted to the grip.
EGENSKAPER
Colour
black
Material
Plastic
Pris 95:-
Perfect for all 2-stroke riders on the move. The small bottle fits in your tool bag or jacket. Capacity 250 ml, with scaling for different mixture ratios (1 : 40 / 2.5 %; 1 : 50 / 2 %; 1 : 60 / 1.7 %; 1 : 80 / 1.25 %)
EGENSKAPER
Colour
transparent
Volume
0.25
Pris 105:-
200 m Wire with 0.61 mm diameter.
EGENSKAPER
Diameter
0,61 mm
REKOMMENDERADE PRODUKTER
Wire pliers
00029015100
Pris 655:-
- Contains all the most-used bolts and small parts for current Offroad models
- 30 % saving compared with purchasing individual parts
Pris 1065:-
High quality, 5-piece screwdriver set in the KTM design.
EGENSKAPER
Colour
black
Pris 275:-
With space for storing fuses.
EGENSKAPER
Colour
orange
Material
Plastic
Pris 60:-
Funnel specially developed for KTM motorcycles. Diameter (small and large) optimized to suit the filler neck; special groove for optimum ventilation.
EGENSKAPER
Colour
orange
Material
Plastic
Pris 105:-
Easy to use! Measuring range 0 bar – 4 bar. Clamping head rotatable through 90° on a flexible stainless steel feed line. The valve shaft is therefore accessed easily and quickly. Very accurate measurements by way of a durable internal membrane. Internal pressure is reduced after use by a relief valve (push button).
Pris 320:-
- Comfortable and easy to use
- Fits all standard valves. Pressure display in bar or psi
- Integrated pressure release valve for accurate pressure adjustment
- Disengageable display and work area lighting
- Energy-saving function with automatic cut-off
- Maximum measuring pressure: 11 bar
EGENSKAPER
Colour
black
ANVÄNDARMANUAL / DOKUMENT
Pris 425:-
The ideal tool for checking perfect wheel position when tensioning the chain.
Pris 535:-
- Highest quality workmanship
- Including straps
- It withstands a load of 180 kg.
- The total length is approx.200 cm, folded approx.100 cm.
EGENSKAPER
Material
Aluminium
weight
5.5
Pris 2140:-
- Prevents dirty grips
Pris 105:-
- This mat is already mandatory for many races
- Complies with FIM regulations
- The special material mix absorbs overflowing fuel
- The mat also facilitates the retrieval of tools, screws and other small parts during service work
- Rubberised back
- Size: 170 cm x 100 cm
EGENSKAPER
Type
kein Fahrzeug
Pris 1495:-
- Enables secure fastening of the machine
- Protects handlebar and tank from scratches
- Made from durable ballistic nylon
- Load capacity of 280 kg
- With handlebar loops
- With rubberised hooks and carabiner on belt ends
EGENSKAPER
Colour
black
Pris 525:-
- Provides optimum protection
Pris 161:-
- Made from high-tensile, durable steel
- Highest quality workmanship
- Double locking mechanism
- Locking cylinder with optimum protection against any attempts at manipulation
- Two keys supplied as standard
- Includes rotating PVC cover that protects the cylinder lock from dirt
EGENSKAPER
Material
Steel
REKOMMENDERADE PRODUKTER
90112916044
ANVÄNDARMANUAL / DOKUMENT
Pris 1495:-
13 cm Tall, 3 pieces each
REKOMMENDERADE PRODUKTER
00029949010
ANVÄNDARMANUAL / DOKUMENT
Pris 30:-
Start numbers
30:-
322200
13 cm Tall, 3 pieces each
REKOMMENDERADE PRODUKTER
00029949010
ANVÄNDARMANUAL / DOKUMENT
Pris 30:-
- Made of robust material
- Pre-cut stickers
EGENSKAPER
Type
kein Fahrzeug
ANVÄNDARMANUAL / DOKUMENT
Pris 165:-
- Elegant look
EGENSKAPER
Colour
silver
Material
Aluminium
Type
kein Fahrzeug
Pris 60:-
- Anodised valve caps
EGENSKAPER
Colour
orange
Surface
Anodized
Material
Aluminium
Pris 105:-
Tool for removing bearings from a housing
EGENSKAPER
Type
Repair
Pris 1350:-
Tool for separating components (steering column bearings)
EGENSKAPER
Type
Outdated
Pris 3010:-
Tool for removing and installing components (special nut)
EGENSKAPER
Type
Outdated
Pris 274:-
Tool for removing and fitting screws (primary gear)
EGENSKAPER
Type
Outdated
Pris 640:-
Tool for pressing in components (wishbone ball head)
EGENSKAPER
Type
Outdated
Pris 201:-
Tool for pressing in components (wishbone ball head)
EGENSKAPER
Type
Outdated
Pris 370:-
Tool for protecting components (water pump installation)
EGENSKAPER
Type
Outdated
Pris 198:-
Tool for holding components (clutch)
EGENSKAPER
Type
Outdated
Pris 720:-