• Orange with KTM logo
• 50 mm wide & 99 m long

• High stiffness and strength
• Made of high-quality carbon
• Optimal protection against stone impact
• Visual highlight

• Clear pressure point across the entire temperature range
• More brake power
• Higher stiffness with the same weight
• Made of high-strength aluminum

• No fading
• Outer ring made of stainless high-performance brake steel
• Minimal wear on brake pads
• Significantly longer lasting
• With Flame design for added braking performance

• Floating
• Outer ring made of stainless high-performance brake steel
• Inner ring anodised
• Minimal wear on brake pads
• Larger diameter for added braking performance

• Can only be used in conjunction with 4 piston brake caliper 5841301564404 or 6 piston brake caliper 5941301504404
• In combination with 4 piston brake caliper 58413015644/04 no speedometer signal will be sent

• Floating
• Outer ring made of stainless high-performance brake steel
• Inner ring anodised
• Minimal wear on brake pads

• With return valve
• Anodised dust protection cap
• Quick and easy bleeding of the brake

• CNC milled from high-strength aluminum
• Elegant anodised surface

• Protects the brake pedal from bending by branches

• For all 48 mm forks
• Made of high-quality carbon

• Specially developed for use in motocross
• No O- or Z-rings > minimum loss of power and good durability

• Specially developed for use in motocross
• No O- or Z-rings > minimum loss of power and good durability

In orange Factory look.

• Race look
• With exchangeable chain track surface, therefore extremely durable
• Specially designed for the challenges of off-road use

• CNC machined out of teflon

• Highest quality workmanship
• The right combination of look, style, and performance
• Specially designed for the challenges of off-road use
• Made from special, high-strength plastic for maximum stability
• With exchangeable chain track surface, therefore extremely durable

• Race look

• Significantly longer durability
• Teeth made of high-strength steel, for an extra long service life
• Extremely low-wear
• Recommended for long journeys

• Specially designed for the challenges of off-road use
• Significantly longer durability
• Made of high-strength aluminum
• The right combination of look, style, and performance

• The lightest Renthal Sprocket on the market
• Provide maximum power transfer and long-life due to advanced tooth profile and perfect concentricity
• Combination of a high strength base material and exceptionally hardwearing surface

• Specially designed for the challenges of off-road use
• Significantly longer durability
• Made of high-strength aluminum
• The right combination of look, style, and performance

• The lightest Renthal Sprocket on the market
• Provide maximum power transfer and long-life due to advanced tooth profile and perfect concentricity
• Combination of a high strength base material and exceptionally hardwearing surface

• Teeth made of high-strength steel, for an extra long service life
• Aluminum center section, reduces unsprung masses
• Permanently joined together with high-strength rivets
• At least three times longer service life than other aluminum rear sprockets
• 50 % lighter than steel rear sprockets
• Longer service life of the entire drivetrain kit

• Teeth made of high-strength steel, for an extra long service life
• Aluminum center section, reduces unsprung masses
• Permanently joined together with high-strength rivets
• At least three times longer service life than other aluminum rear sprockets
• 50 % lighter than steel rear sprockets
• Longer service life of the entire drivetrain kit

• CNC milled from high-strength aluminum
• Elegant anodised surface

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Easy to mount
• Suitable for the left and right side

• CNC milled from high-strength aluminum
• Elegant anodised surface

• CNC milled from high-strength aluminum
• Elegant anodised surface

• CNC milled from high-strength aluminum
• Elegant anodised surface

• Improves clutch performance and durability
• Hinson-typical surface treatment for significantly improved robustness compared to the standard part
• Very clean running of the clutch, which leads to reduced heat development when the clutch is pulled
• Can be installed in the standard clutch or in combination with other Hinson clutch components
• CNC milled from high-strength aluminum
• Improves heat dissipation

• Protects the footpegs from damage during a potential fall

• Coated neoprene ring
• Simply pulled over the grips

• Warm hands, no matter what the weather

• Developed according to the requirements of our factory drivers
• Less stress when riding
• Objective: comfort AND safety
• Ergonomic contour adapted to the shape of the hand for maximum comfort
• Half waffle grip
• For a secure grip
• Three areas for the metal wire locking
• Version: medium

• Developed according to the requirements of our factory drivers
• Less stress when riding
• Objective: comfort AND safety
• Ergonomic contour adapted to the shape of the hand for maximum comfort
• Half waffle grip
• For a secure grip
• Three areas for the metal wire locking
• Version: soft

• Right grip permanently glued to the throttle grip
• Left grip with aluminum clamping ring for fixing on the handlebar
• Inconvenient gluing and securing with wire no longer necessary

• Recommended for use in conjunction with radial hand brake cylinders
• More distance between brake/clutch lever and handguard

This handguard set has been specially developed for your motorcycle and is an essential accessory for heavy-duty offroad and Supermoto sessions. The broad, generous proportions, combined with the robust aluminum external frame ensure good mobility together with maximum protection in the event of a collision, stones thrown up from the road, branches etc.

• Excellent weather protection
• Maximum protection against falls, flying stones, branches, etc.
• Indispensable companion for heavy off-road and Supermoto use
• Wide, generous design in combination with sturdy aluminum bracket
• Prevents broken levers
• Made of robust plastic

• Excellent weather protection
• Maximum protection against falls, flying stones, branches, etc.
• Indispensable companion for heavy off-road and Supermoto use
• Wide, generous design in combination with sturdy aluminum bracket
• Prevents broken levers
• Made of robust plastic

• Maximum protection against falls, flying stones, branches, etc.
• Indispensable companion for heavy off-road and Supermoto use
• Wide, generous design in combination with sturdy aluminum bracket
• Prevents broken levers
• Made of robust plastic
• Excellent weather protection

• Maximum protection against falls, flying stones, branches, etc.
• Indispensable companion for heavy off-road and Supermoto use
• Wide, generous design in combination with sturdy aluminum bracket
• Prevents broken levers
• Made of robust plastic

• Excellent weather protection
• Closed design
• 2-component plastic handguard
• Black middle section = maximum strength for optimum protection
• Colored top and bottom parts = highly flexible under the roughest conditions
• Available in two different heights
• Improved optics

• Closed design
• 2-component plastic handguard
• Black middle section = maximum strength for optimum protection
• Colored top and bottom parts = highly flexible under the roughest conditions
• Available in two different heights
• Improved optics

• Uncompromising race look
• Extremely light
• Open design
• 2-component plastic handguard
• Black middle section = maximum strength for optimum protection
• Colored top and bottom parts = highly flexible under the roughest conditions

• CNC milled handlebar mount with damping rubber inserts
• Gentle on wrists and shoulder joints
• Damping of hard shocks
• Absorption of chassis and engine vibrations
• Additional handlebar damping in horizontal direction
• Optimum steering precision
• Further dampers available in three different degrees of hardness (soft, medium, hard) for individual adjustment

• Handlebar height adjustable to 2 positions

• Made of high-strength aluminum
• Tested in complex and specially-developed test cycles
• Position markings for easy adjustment

• Dimensions: A = 115 mm, B = 806 mm, C = 62 mm

• The Twinwall, in the KTM orange design
• Two handlebars in one
• The exterior ensures maximum resistance to external damage (e.g. fall)
• Additionally hard anodised against corrosion
• The interior, made of a special alloy, is also hard anodised to protect it from damage by the handlebar controls.
• Nylon inserts in the inner tube allow thinner walls
• Very good flex properties
• Comes with handlebar pad

• Dimensions: A = 104 mm, B = 811 mm, C = 74 mm

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Prevents the hand grips from chafing in the event of a fall

• Already mandatory in many competitions
• Provides optimum protection

• Already mandatory in many competitions
• Provides optimum protection

• High-end steering damper
• Maximum control on fast tracks
• Gain in stability at the front wheel
• Fully adjustable
• Well thought-out mounting of the damper enables individual handlebar adjustment
• Reduced weight
• Sensitive response behavior
• High speed DCC
• Developed according to the requirements of our factory drivers

• Optimum 25 click setting range.
• Proven success with the KTM Works Rally Team.
• For use on Enduro MY21 and later (EU Version), the Factory fuel tank cap vent is required

• Universally applicable for mounting the GPS bracket

• Smartphone can be easily removed with its cover
• Protects your valuable smartphone
• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• Smartphone can be easily removed with its cover
• Protects your valuable smartphone
• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• Protects your valuable smartphone from rain, dust or mud
• Touchscreen remains fully functional
• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• Smartphone can be easily removed with its cover
• Protects your valuable smartphone
• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• Smartphone can be easily removed with its cover
• Protects your valuable smartphone
• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• Smartphone can be easily removed with its cover
• Protects your valuable smartphone
• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• Smartphone can be easily removed with its cover
• Protects your valuable smartphone
• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• Fast and easy inductive charging of the smartphone during the ride
• Can be mounted on the SPC+ smartphone bracket and smartphone adapter
• Including waterproof USB-A charging cable, only this cable shall be used for the connection with the bike
• Dimensions: 60 mm (diameter) x 12 mm (height)

• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• Dimensions: 66x55mm (2.6x2.17 inch)

• For all 48 mm forks
• Ideal protection for sealing the fork
• For use with a closed fork protector

• For all 48 mm forks
• Ideal protection for sealing the fork
• For use with an open fork protector

• For all 48 mm forks
• Ideal protection for sealing the fork
• For use with an open fork protector

• Protects the lower PDS bearing against dirt permeation
• Extends the service life of the lower PDS bearing

• Made of high-strength aluminum
• Improved braking performance

• CNC milled from high-strength aluminum
• Not lockable
• Extremely fast and keyless refueling

• For tank and carburetor bleeding
• Gasoline resistant
• Can only be used for bleeding purposes
• Cannot be used as a connection between tank and carburetor!

• Robust, solid construction
• Modern and simple design
• Easy to mount

• New bike stand generation
• Plastic - aluminum combined for highest stiffness
• Extremely stable due to a broad stand design
• Top plate in 2k injection molding technology
• Side plates for graphics mounting
• Use either the supplied, or your own graphics

• Sturdy tubular steel construction
• Tool for lifting the motorcycle at the fork legs
• Makes removal of the front wheel easier

• Tool for lifting the motorcycle
• Secure stand for your bike

• Secure stand for your bike

• Testing, charging and keeping batteries fresh
• Fully automatic and economical battery charging by means of programmed charge characteristic
• Short-circuit protection
• Reverse polarity protection

• Can be used for several types of batteries (Pb, LiFePo4)
• Charging with a specific power control program
• Trickle charge during diagnostic or flashing the vehicle
• Recovery mode for low battery voltage (BMS, battery management system)
• Optimizes battery performance and service life
• Including power supply cable type EU

• The Bead Buddy acts as your third hand when fitting tires
• Holds the tire in the tire bed, thereby making tire fitting much easier
• Simply hook it into the spokes and away you go Particularly recommended for tire fitting with mousse.

• Easy handling and operation
• More safety
• Less wear on the cord
• Made of high quality material
• Cable not included

• 3 x short version 51012092100
• 3 x long version 51012093100

• This clever tool is a must for every motorcycle toolbox
• With it, you can remove dirt from your fork seals effortlessly
• No matter whether it's in the garage or directly at the racetrack this tool extends the life of your seals many times over
• For all 48 mm forks

• Use this to remove the dirt from your last mud battle with ease!
• A motorcycle grip rubber (not included) can be fitted to the grip.

• Makes setting the sag significantly simpler.
• Folding version for easy stowing in the tool box.

• Contains all the most-used bolts and small parts for current Offroad models
• 30 % saving compared with purchasing individual parts

• Keeps water out of the silencer during cleaning.
• For inner-diameter of 22-42 mm

• Comfortable and easy to use
• Fits all standard valves. Pressure display in bar or psi
• Integrated pressure release valve for accurate pressure adjustment
• Disengageable display and work area lighting
• Energy-saving function with automatic cut-off
• Maximum measuring pressure: 11 bar

The benefits of the KTM tyre warmer

• Optimum tyre temperature achieved in just 30 min
• LED for monitoring tyre warming
• Turns off automatically when the temperature reaches 78 °C to 80 °C
• Special fire-proof internal insulation in pure aramid fiber for maximum energy efficiency
• External cable and plug made of special rubber, resistant to grease and oil (max temp. 200 °C)
• Manufactured from robust nylon, with silicone surface finish for protection against acid and dirt
• Completely waterproof (inside and out), so safe and reliable in the rain as well
• CE-certified230 V , 50 - 60 Hz, Euro plug
• Fits tire sizes up to max. 160/60 - 17

• Highest quality workmanship
• Including straps

• It withstands a load of 180 kg.
• The total length is approx.200 cm, folded approx.100 cm.

• Practical help when loading the bike or jacking up with the rear wheel lifting device

• Stabilises the motorcycle during transport
• Protects the fork shaft sealing rings and fork springs against damage due to tension belts being tightened too much
• Is clamped between the bottom of the front fender and tyre

• Prevents dirty grips

• Protects the motorcycle from dust, scratches and the like
• The indoor bike cover makes every KTM an eye-catcher in the garage
• Completely dust and dirt-impermeable fabric
• Material with special structure
• The inside is softly padded

• Guaranteed perfect protection in all seasons
• Made of exclusive, pigmented fabric
• Includes practical carrying bag
• Protects the motorcycle from dust, scratches and the like

• Guaranteed perfect protection in all seasons
• Made of exclusive, pigmented fabric
• Includes practical carrying bag
• Protects the motorcycle from dust, scratches and the like

• This mat is already mandatory for many races
• Complies with FIM regulations
• The special material mix absorbs overflowing fuel
• The mat also facilitates the retrieval of tools, screws and other small parts during service work
• Rubberised back

• Size: 170 cm x 100 cm

• Enables secure fastening of the machine
• Protects handlebar and tank from scratches
• Made from durable ballistic nylon
• Load capacity of 280 kg
• With handlebar loops
• With rubberised hooks and carabiner on belt ends

• Provides optimum protection

• Provides optimum protection

• Made from high-tensile, durable steel
• Highest quality workmanship

• Double locking mechanism
• Locking cylinder with optimum protection against any attempts at manipulation
• Two keys supplied as standard
• Includes rotating PVC cover that protects the cylinder lock from dirt

• Made of robust material
• Pre-cut stickers

• Elegant look

• Anodised valve caps

• Pre-cut stickers
• Suitable for front and rear wheel rim

• Pre-cut stickers
• Suitable for front and rear wheel rim

• Pre-cut stickers
• Suitable for front and rear wheel rim

• comes with bushings for 26mm axle diameter
• can be adapted to other axle diameter by using the bike's  stock bushings

• comes with bushings for 20mm axle diameter
• can be adapted to other axle diameter by using the bike's  stock bushings