• Orange with KTM logo
• 50 mm wide & 99 m long

• Consistent, high-level braking performance
• Perfect dosing capacity
• Outer ring made of stainless high-performance brake steel

• No fading
• Consistent, high-level braking performance
• Perfect dosing capacity
• Greater safety in all conditions
• Floating
• No distortion
• No brake juddering
• Clear pressure point across the entire temperature range
• Inner ring anodised
• Outer ring made of stainless high-performance brake steel
• Less manual force with the same brake power
• Pure race feeling

• With return valve
• Anodised dust protection cap
• Quick and easy bleeding of the brake

• Made of high-quality carbon
• High stiffness and strength
• Specially reinforced at points at risk of grinding
• Perfect fit

• Made of high-quality carbon
• High stiffness and strength
• Specially reinforced at points at risk of grinding
• Perfect fit

• Specially developed for use in motocross
• No O- or Z-rings > minimum loss of power and good durability

• Significantly longer durability
• Teeth made of high-strength steel, for an extra long service life
• Extremely low-wear
• Recommended for long journeys

• Specially designed for the challenges of off-road use
• Significantly longer durability
• Made of high-strength aluminum
• The right combination of look, style, and performance

• The lightest Renthal Sprocket on the market
• Provide maximum power transfer and long-life due to advanced tooth profile and perfect concentricity
• Combination of a high strength base material and exceptionally hardwearing surface

• Specially designed for the challenges of off-road use
• Significantly longer durability
• Made of high-strength aluminum
• The right combination of look, style, and performance

• The lightest Renthal Sprocket on the market
• Provide maximum power transfer and long-life due to advanced tooth profile and perfect concentricity
• Combination of a high strength base material and exceptionally hardwearing surface

• Teeth made of high-strength steel, for an extra long service life
• Aluminum center section, reduces unsprung masses
• Permanently joined together with high-strength rivets
• At least three times longer service life than other aluminum rear sprockets
• 50 % lighter than steel rear sprockets
• Longer service life of the entire drivetrain kit

• Teeth made of high-strength steel, for an extra long service life
• Aluminum center section, reduces unsprung masses
• Permanently joined together with high-strength rivets
• At least three times longer service life than other aluminum rear sprockets
• 50 % lighter than steel rear sprockets
• Longer service life of the entire drivetrain kit

• Teeth made of high-strength steel, for an extra long service life
• Aluminum center section, reduces unsprung masses
• Permanently joined together with high-strength rivets
• At least three times longer service life than other aluminum rear sprockets
• 50 % lighter than steel rear sprockets
• Longer service life of the entire drivetrain kit

• Contains all parts for dismantling the side stand
• Simulates a folded up side stand
• Plug & Play mounting

• Secure stand for your bike
• Specifically for soft surfaces such as sand

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Easy to mount
• Suitable for the left and right side

• CNC milled from high-strength aluminum
• Elegant anodised surface

• CNC milled from high-strength aluminum
• Elegant anodised surface

• CNC milled from high-strength aluminum
• Elegant anodised surface

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Includes drilling for safety wire

• Greater performance due to special engine mapping
• Developed for use on the race track

• High stiffness and strength
• Extremely light
• Extremely durable
• Low thermal expansion
• High long-term temperature stability
• Maximum protection against falls, flying stones, branches, etc.
• Protects against heat and unwanted contact

• High stiffness and strength
• Extremely light
• Extremely durable
• Low thermal expansion
• High long-term temperature stability
• Maximum protection against falls, flying stones, branches, etc.
• Protects against heat and unwanted contact

• High stiffness and strength
• Extremely light
• Extremely durable
• Low thermal expansion
• High long-term temperature stability
• Maximum protection against falls, flying stones, branches, etc.
• Protects against heat and unwanted contact

• Absorbs the blows of off-road riding
• Fatigue-free standing riding
• Offers more comfort during long journeys

• Enlarged tread area
• The adjustability offers the right ergonomics for every rider
• For the off-road motorcycles look
• Endurance-tested for the toughest off-road applications
• Weight-optimised
• Tested in complex and specially-developed test cycles

• The footpegs are adjustable in 8 positions (in a circle)
• Compared to the standard footpeg position, these footpegs can be positioned up to 10mm higher, or 5mm forward or backwards
• In addition this footpag can also be slightly tilted (in steps of 15°)
• These footpegs are 15mm longer and 3mm wider compared to the standard mounted footpegs
• The standard mounted footpeg rubber can also be mounted on these footpegs
• The footpeg itself is made out of aluminum and has an anodised surface finish
• The footpeg carrier is made out of steel and has an galvanic surface finish

• Protects the footpegs from damage during a potential fall

• Coated neoprene ring
• Simply pulled over the grips

• Developed according to the requirements of our factory drivers
• Less stress when riding
• Objective: comfort AND safety
• Ergonomic contour adapted to the shape of the hand for maximum comfort
• Half waffle grip
• For a secure grip
• Three areas for the metal wire locking
• Version: medium

• Developed according to the requirements of our factory drivers
• Less stress when riding
• Objective: comfort AND safety
• Ergonomic contour adapted to the shape of the hand for maximum comfort
• Half waffle grip
• For a secure grip
• Three areas for the metal wire locking
• Version: soft

This handguard set has been specially developed for your motorcycle and is an essential accessory for heavy-duty offroad and Supermoto sessions. The broad, generous proportions, combined with the robust aluminum external frame ensure good mobility together with maximum protection in the event of a collision, stones thrown up from the road, branches etc.

• Excellent weather protection
• Maximum protection against falls, flying stones, branches, etc.
• Indispensable companion for heavy off-road and Supermoto use
• Wide, generous design in combination with sturdy aluminum bracket
• Prevents broken levers
• Made of robust plastic

• Excellent weather protection
• Maximum protection against falls, flying stones, branches, etc.
• Indispensable companion for heavy off-road and Supermoto use
• Wide, generous design in combination with sturdy aluminum bracket
• Prevents broken levers
• Made of robust plastic

• Never again cold fingers!
• Mounting over handlebar and switches
• Better control during winter ride-outs

• Closed design
• 2-component plastic handguard
• Black middle section = maximum strength for optimum protection
• Colored top and bottom parts = highly flexible under the roughest conditions
• Available in two different heights
• Improved optics

• Extremely sturdy aluminum brackets
• Prevents broken levers
• Including all required assembly materials

• CNC milled handlebar mount with damping rubber inserts
• Gentle on wrists and shoulder joints
• Damping of hard shocks
• Absorption of chassis and engine vibrations
• Additional handlebar damping in horizontal direction
• Optimum steering precision
• Further dampers available in three different degrees of hardness (soft, medium, hard) for individual adjustment

• Handlebar height adjustable to 2 positions

• Made of high-strength aluminum
• Tested in complex and specially-developed test cycles
• Position markings for easy adjustment

• Dimensions: A = 115 mm, B = 806 mm, C = 62 mm

• Conversion kit for stylish, modern LED turn signals
• Increased safety due to extremely bright flashing light
• Integrate perfectly into the vehicle design

• With protective cover
• Output voltage 5 V/1,000 mA
• Easily accessible
• Mounting material included in scope of supply

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Prevents the hand grips from chafing in the event of a fall

• Already mandatory in many competitions
• Provides optimum protection

• Already mandatory in many competitions
• Provides optimum protection

• CNC milled from high-strength aluminum
• Elegant anodised surface

• Improves your rear view.
• The mirror extension is mounted simply between the original mirror and mirror bracket.
• Length: 40mm

• Protects your valuable smartphone from rain, dust or mud
• Touchscreen remains fully functional
• Handlebar pad and smartphone holder in one
• Smartphone cover with velcro fastener attached to the handlebar pad
• Smartphone can be easily removed with its cover
• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• For Smartphones up to 160 x 80 mm
• Comes with two separate protective strips in case the sleeve is not used
• Can also be fitted in combination with the PHDS-handlebar support
• Smartphone not included!

• Exceptionally robust
• Optimum load transfer via existing mounting points on the chassis
• Easy mounting without changing the passenger footpegs

• For waterproof storage of documents, maps, cellphones, navigation devices etc.

• Universally applicable for mounting the GPS bracket

• Smartphone can be easily removed with its cover
• Protects your valuable smartphone
• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• Optimal solution for quick and secure fastening of your smartphone on the vehicle
• Smartphone can be easily removed with its cover
• Protects your valuable smartphone

Including a magnetic ring, so the case is also "MagSafe" compatible.

Extremely slim design, 40% thinner compared to the previous smartphone case generation.

• Smartphone can be easily removed with its cover
• Protects your valuable smartphone
• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• Protects your valuable smartphone from rain, dust or mud
• Touchscreen remains fully functional
• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• Smartphone can be easily removed with its cover
• Protects your valuable smartphone
• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• Smartphone can be easily removed with its cover
• Protects your valuable smartphone
• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• Smartphone can be easily removed with its cover
• Protects your valuable smartphone
• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• Smartphone can be easily removed with its cover
• Protects your valuable smartphone
• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• Dimensions: 66x55mm (2.6x2.17 inch)

• Protects from damage in the event of a fall
• Easy to mount
• Plug & Play mounting
• Elegant anodised surface
• CNC milled from high-strength aluminum
• High-quality look
• Perfect fit

• Protects from damage in the event of a fall
• Easy to mount
• Plug & Play mounting
• Elegant anodised surface
• CNC milled from high-strength aluminum
• High-quality look
• Perfect fit

• Protects from damage in the event of a fall
• Easy to mount
• Plug & Play mounting
• Elegant anodised surface
• CNC milled from high-strength aluminum
• High-quality look
• Perfect fit

• Protects from damage in the event of a fall
• Easy to mount
• Plug & Play mounting
• Elegant anodised surface
• CNC milled from high-strength aluminum
• High-quality look
• Perfect fit

• Prevents dust and dirt from entering the tank when the fuel tank cap is opened

• Excellent protection for the engine housing and the header
• Made of high-strength aluminum
• Highest quality workmanship
• Optimal protection against stone impact
• Protection against damage when setting down

• Made of high-strength aluminum
• Improved braking performance

• Enlarged tread surface area
• Greater control/safety
• Fatigue-free riding standing up

• Enlarged tread surface area
• Greater control/safety
• Fatigue-free riding standing up

• For tank and carburetor bleeding
• Gasoline resistant
• Can only be used for bleeding purposes
• Cannot be used as a connection between tank and carburetor!

• Support adapters are clamped into the rear wheel lifting device
• Practical help when loading the bike or jacking up with the rear wheel lifting device

• These support adapters give your motorcycle an even firmer standing position

• Secure stand for your bike
• Made of high-strength aluminum

• Secure stand for your bike
• Made of high-strength aluminum
• Predefined predetermined breaking point

• Tool for lifting the motorcycle at the rear axle
• Secure stand for your bike

• Tool for lifting the motorcycle at the rear axle
• Secure stand for your bike

• Sturdy tubular steel construction
• Tool for lifting the motorcycle at the triple clamp
• Makes removal of the front wheel easier

• Support adapters are clamped into the rear wheel lifting device
• Tool for lifting the motorcycle at the rear axle
• Secure stand for your bike

• Testing, charging and keeping batteries fresh
• Fully automatic and economical battery charging by means of programmed charge characteristic
• Short-circuit protection
• Reverse polarity protection

• Can be used for several types of batteries (Pb, LiFePo4)
• Charging with a specific power control program
• Trickle charge during diagnostic or flashing the vehicle
• Recovery mode for low battery voltage (BMS, battery management system)
• Optimizes battery performance and service life
• Including power supply cable type EU

• The Bead Buddy acts as your third hand when fitting tires
• Holds the tire in the tire bed, thereby making tire fitting much easier
• Simply hook it into the spokes and away you go Particularly recommended for tire fitting with mousse.

• Easy handling and operation
• More safety
• Less wear on the cord
• Made of high quality material
• Cable not included

• 3 x short version 51012092100
• 3 x long version 51012093100

• This clever tool is a must for every motorcycle toolbox
• With it, you can remove dirt from your fork seals effortlessly
• No matter whether it's in the garage or directly at the racetrack this tool extends the life of your seals many times over
• For all 48 mm forks

• Use this to remove the dirt from your last mud battle with ease!
• A motorcycle grip rubber (not included) can be fitted to the grip.

- Push-on spoke wrenches in sizes 5.65 and 6.95 mm
- Push-on ratchet ¼"
- Ratchet attachments: 6, 8, 10 mm socket wrench, 15 Torx

• Keeps water out of the silencer during cleaning.
• For inner-diameter of 22-42 mm

• Comfortable and easy to use
• Fits all standard valves. Pressure display in bar or psi
• Integrated pressure release valve for accurate pressure adjustment
• Disengageable display and work area lighting
• Energy-saving function with automatic cut-off
• Maximum measuring pressure: 11 bar

• Highest quality workmanship
• Including straps

• It withstands a load of 180 kg.
• The total length is approx.200 cm, folded approx.100 cm.

• Practical help when loading the bike or jacking up with the rear wheel lifting device

• Prevents dirty grips

• Protects the motorcycle from dust, scratches and the like
• The indoor bike cover makes every KTM an eye-catcher in the garage
• Completely dust and dirt-impermeable fabric
• Material with special structure
• The inside is softly padded

• Guaranteed perfect protection in all seasons
• Made of exclusive, pigmented fabric
• Includes practical carrying bag
• Protects the motorcycle from dust, scratches and the like

• Guaranteed perfect protection in all seasons
• Made of exclusive, pigmented fabric
• Includes practical carrying bag
• Protects the motorcycle from dust, scratches and the like

• This mat is already mandatory for many races
• Complies with FIM regulations
• The special material mix absorbs overflowing fuel
• The mat also facilitates the retrieval of tools, screws and other small parts during service work
• Rubberised back

• Size: 170 cm x 100 cm

• This mat is already mandatory for many races
• The special material mix absorbs overflowing fuel
• The mat also facilitates the retrieval of tools, screws and other small parts during service work
• Complies with FIM regulations
• Rubberised back

• Enables secure fastening of the machine
• Protects handlebar and tank from scratches
• Made from durable ballistic nylon
• Load capacity of 280 kg
• With handlebar loops
• With rubberised hooks and carabiner on belt ends

• Provides optimum protection

• Provides optimum protection

• Made from high-tensile, durable steel
• Highest quality workmanship

• Double locking mechanism
• Locking cylinder with optimum protection against any attempts at manipulation
• Two keys supplied as standard
• Includes rotating PVC cover that protects the cylinder lock from dirt

• Made of robust material
• Pre-cut stickers

• Optimal basis for graphics kits
• Perfect fit

• Optimal basis for graphics kits
• Perfect fit

• Elegant look

• Anodised valve caps

• Pre-cut stickers
• Suitable for front and rear wheel rim

• Pre-cut stickers
• Suitable for front and rear wheel rim

• Pre-cut stickers
• Suitable for front and rear wheel rim

• 220 Volt
• For all WP-shocks
• Two 3 litre tanks
• Fill two different shocks at the same time
• Programmable filling cycle time
• Two filling presets
• Intuitive control via a 4.3" LCD screen
• Low oil warning
• Vacuum 42L/min
• Max. vacuum -0,98 bar
• Adjustable pressure 1,5-3 bar
• Incl. 2 WP-adapters