• Orange with KTM logo
• 50 mm wide & 99 m long

• CNC milled from high-strength solid aluminum
• Chrome-plated pad guide pins on the brake caliper
• The benefits:
  
  • Reduced brake pad canting, hence no uneven wear
  • Constant braking feel, irrespective of brake pad wear or temperature
  • No vibration from the brake

Fitting possible on SX/EXC models without adapter, with the original hand pump and brake hose.
Can only be fitted with a 17"or 16.5" front wheel. 310 mm brake disc 586.09.060.000 or 250.09.260.000 required.
In combination with brake disc 25009260000 (310 mm) no speedometer signal will be sent.

• Clear pressure point across the entire temperature range
• More brake power
• Higher stiffness with the same weight
• Made of high-strength aluminum

• No fading
• Outer ring made of stainless high-performance brake steel
• Minimal wear on brake pads
• Significantly longer lasting
• With Flame design for added braking performance

• Floating
• Outer ring made of stainless high-performance brake steel
• Inner ring anodised
• Minimal wear on brake pads

• With return valve
• Anodised dust protection cap
• Quick and easy bleeding of the brake

• With return valve
• Anodised dust protection cap
• Quick and easy bleeding of the brake

• Protects the brake disc in the event of a fall
• High stiffness and strength
• Protects the rear brake disc from stones and other solid obstacles
• CNC milled from high-strength aluminum
• Lighter than series components

• CNC milled from high-strength aluminum
• Elegant anodised surface

• Protects the brake pedal from bending by branches

• Perfect fit
• Made of high-quality carbon
• Optimal protection against stone impact

• Only for Brembo systems

• For all 48 mm forks
• Made of high-quality carbon

• Specially developed for use in motocross
• No O- or Z-rings > minimum loss of power and good durability

• Specially developed for use in motocross
• No O- or Z-rings > minimum loss of power and good durability

• Specially developed for use in motocross
• No O- or Z-rings > minimum loss of power and good durability

In orange Factory look.

• Prevents the chain from hitting the rear tyre
• Perfect chain guide, no branches drawn in between chain and engine housing

• Race look
• With exchangeable chain track surface, therefore extremely durable
• Specially designed for the challenges of off-road use

• CNC machined out of teflon

• Highest quality workmanship
• The right combination of look, style, and performance
• Specially designed for the challenges of off-road use
• Made from special, high-strength plastic for maximum stability
• With exchangeable chain track surface, therefore extremely durable

• Race look

• Significantly longer durability
• Teeth made of high-strength steel, for an extra long service life
• Extremely low-wear
• Recommended for long journeys

• Resistant to the toughest stresses and strains
• Forged lightening indents reduce rotational mass
• Grooves between the teeth clear dirt under the chain
• Extends chain life

• Specially designed for the challenges of off-road use
• Significantly longer durability
• Made of high-strength aluminum
• The right combination of look, style, and performance

• The lightest Renthal Sprocket on the market
• Provide maximum power transfer and long-life due to advanced tooth profile and perfect concentricity
• Combination of a high strength base material and exceptionally hardwearing surface

• Specially designed for the challenges of off-road use
• Significantly longer durability
• Made of high-strength aluminum
• The right combination of look, style, and performance

• The lightest Renthal Sprocket on the market
• Provide maximum power transfer and long-life due to advanced tooth profile and perfect concentricity
• Combination of a high strength base material and exceptionally hardwearing surface

• Teeth made of high-strength steel, for an extra long service life
• Aluminum center section, reduces unsprung masses
• Permanently joined together with high-strength rivets
• At least three times longer service life than other aluminum rear sprockets
• 50 % lighter than steel rear sprockets
• Longer service life of the entire drivetrain kit

• Teeth made of high-strength steel, for an extra long service life
• Aluminum center section, reduces unsprung masses
• Permanently joined together with high-strength rivets
• At least three times longer service life than other aluminum rear sprockets
• 50 % lighter than steel rear sprockets
• Longer service life of the entire drivetrain kit

This is how the factory riders start!
The factory start is mounted directly on the fork. Before the start, the fork is dipped and fixed in the desired position to shift the center of gravity forwards. This to a large extent prevents the front wheel from lifting at the start, thus providing greater traction and perhaps securing you the odd holeshot or two. The first time the fork dips, the fixing is slackened and the fork released automatically.
With additional fork protector reinforcement for more stable attachment to the fork stub.

• CNC milled from high-strength aluminum
• Elegant anodised surface

• CNC milled from high-strength aluminum
• Elegant anodised surface

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Easy to mount
• Suitable for the left and right side

• CNC milled from high-strength aluminum
• Elegant anodised surface

• CNC milled from high-strength aluminum
• Elegant anodised surface

• CNC milled from high-strength aluminum
• Elegant anodised surface

• Improved torque curve combined with very rideable peak performance
• More sensitive throttle response and resulting improved traction
• Durability suitable for extreme enduro use
• Made from titanium - that means: ultra-light
• Welded on brackets
• Reinforced titanium end cap (factory team standard)
• Pleasant deep sound
• Tuned for compliance with the latest applicable noise regulations

With removable noise reduction insert.
Can only be fitted in combination with original header.

• Protects the footpegs from damage during a potential fall

• Coated neoprene ring
• Simply pulled over the grips

• Developed according to the requirements of our factory drivers
• Less stress when riding
• Objective: comfort AND safety
• Ergonomic contour adapted to the shape of the hand for maximum comfort
• Half waffle grip
• For a secure grip
• Three areas for the metal wire locking
• Version: medium

• Developed according to the requirements of our factory drivers
• Less stress when riding
• Objective: comfort AND safety
• Ergonomic contour adapted to the shape of the hand for maximum comfort
• Half waffle grip
• For a secure grip
• Three areas for the metal wire locking
• Version: soft

• Right grip permanently glued to the throttle grip
• Left grip with aluminum clamping ring for fixing on the handlebar
• Inconvenient gluing and securing with wire no longer necessary

• Specially developed for extreme conditions
• Strap made from high-strength nylon
• Makes it easier to stand your motorcycle up

• High-strength nylon strap
• Indispensable for use on extreme terrain
• Makes it easy to get your bike upright
• Attaches to rear frame

• Recommended for use in conjunction with radial hand brake cylinders
• More distance between brake/clutch lever and handguard

This handguard set has been specially developed for your motorcycle and is an essential accessory for heavy-duty offroad and Supermoto sessions. The broad, generous proportions, combined with the robust aluminum external frame ensure good mobility together with maximum protection in the event of a collision, stones thrown up from the road, branches etc.

• Excellent weather protection
• Maximum protection against falls, flying stones, branches, etc.
• Indispensable companion for heavy off-road and Supermoto use
• Wide, generous design in combination with sturdy aluminum bracket
• Prevents broken levers
• Made of robust plastic

• Excellent weather protection
• Maximum protection against falls, flying stones, branches, etc.
• Indispensable companion for heavy off-road and Supermoto use
• Wide, generous design in combination with sturdy aluminum bracket
• Prevents broken levers
• Made of robust plastic

• Maximum protection against falls, flying stones, branches, etc.
• Indispensable companion for heavy off-road and Supermoto use
• Wide, generous design in combination with sturdy aluminum bracket
• Prevents broken levers
• Made of robust plastic

• Uncompromising race look
• Extremely light
• Open design
• 2-component plastic handguard
• Black middle section = maximum strength for optimum protection
• Colored top and bottom parts = highly flexible under the roughest conditions
• Mounting not possible with Twinwall handlebars

• Uncompromising race look
• Extremely light
• Open design
• 2-component plastic handguard
• Black middle section = maximum strength for optimum protection
• Colored top and bottom parts = highly flexible under the roughest conditions

• Uncompromising race look
• Extremely light
• Open design
• 2-component plastic handguard
• Black middle section = maximum strength for optimum protection
• Colored top and bottom parts = highly flexible under the roughest conditions
• Mounting not possible with Twinwall handlebars

• Excellent weather protection
• Closed design
• 2-component plastic handguard
• Black middle section = maximum strength for optimum protection
• Colored top and bottom parts = highly flexible under the roughest conditions
• Available in two different heights
• Improved optics

• Closed design
• 2-component plastic handguard
• Black middle section = maximum strength for optimum protection
• Colored top and bottom parts = highly flexible under the roughest conditions
• Available in two different heights
• Improved optics

• Closed design
• 2-component plastic handguard
• Black middle section = maximum strength for optimum protection
• Colored top and bottom parts = highly flexible under the roughest conditions
• Available in two different heights
• Improved optics

• Uncompromising race look
• Extremely light
• Open design
• 2-component plastic handguard
• Black middle section = maximum strength for optimum protection
• Colored top and bottom parts = highly flexible under the roughest conditions

• Extremely sturdy aluminum brackets
• Prevents broken levers
• Including all required assembly materials

• CNC milled handlebar mount with damping rubber inserts
• Gentle on wrists and shoulder joints
• Damping of hard shocks
• Absorption of chassis and engine vibrations
• Additional handlebar damping in horizontal direction
• Optimum steering precision
• Further dampers available in three different degrees of hardness (soft, medium, hard) for individual adjustment

• Handlebar height adjustable to 2 positions

• Made of high-strength aluminum
• Tested in complex and specially-developed test cycles
• Position markings for easy adjustment

• Dimensions: A = 115 mm, B = 806 mm, C = 62 mm

• The Twinwall, in the KTM orange design
• Two handlebars in one
• The exterior ensures maximum resistance to external damage (e.g. fall)
• Additionally hard anodised against corrosion
• The interior, made of a special alloy, is also hard anodised to protect it from damage by the handlebar controls.
• Nylon inserts in the inner tube allow thinner walls
• Very good flex properties
• Comes with handlebar pad

• Dimensions: A = 118 mm, B = 811 mm, C = 74 mm

• Two handlebars in one
• The exterior ensures maximum resistance to external damage (e.g. fall)
• Additionally hard anodised against corrosion
• The interior, made of a special alloy, is also hard anodised to protect it from damage by the handlebar controls.
• Nylon inserts in the inner tube allow thinner walls
• Very good flex properties
• Comes with handlebar pad

Renthal Twinwall 996

• Dimensions: A = 118 mm, B = 811 mm, C = 74 mm

• The Twinwall, in the KTM orange design
• Two handlebars in one
• The exterior ensures maximum resistance to external damage (e.g. fall)
• Additionally hard anodised against corrosion
• The interior, made of a special alloy, is also hard anodised to protect it from damage by the handlebar controls.
• Nylon inserts in the inner tube allow thinner walls
• Very good flex properties
• Comes with handlebar pad

• Dimensions: A = 104 mm, B = 811 mm, C = 74 mm

• Enables power consumers such as grip heater or radiator fans to be installed on motocross or cross-country models as well

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Including plastic insert
• Reduces the risk of a lever being broken

Suitable for all Brembo® and Formula brake and clutch assembles

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Prevents the hand grips from chafing in the event of a fall

• Already mandatory in many competitions
• Provides optimum protection

• Protects your valuable smartphone from rain, dust or mud
• Touchscreen remains fully functional
• Handlebar pad and smartphone holder in one
• Smartphone cover with velcro fastener attached to the handlebar pad
• Smartphone can be easily removed with its cover
• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• For Smartphones up to 160 x 80 mm
• Comes with two separate protective strips in case the sleeve is not used
• Can also be fitted in combination with the PHDS-handlebar support
• Smartphone not included!

• Prevents snapping of throttle cable wire
• Simple to fit
• Made of aluminum

• High-end steering damper
• Maximum control on fast tracks
• Gain in stability at the front wheel
• Fully adjustable
• Well thought-out mounting of the damper enables individual handlebar adjustment
• Reduced weight
• Sensitive response behavior
• High speed DCC
• Developed according to the requirements of our factory drivers

• Optimum 25 click setting range.
• Proven success with the KTM Works Rally Team.
• For use on Enduro MY21 and later (EU Version), the Factory fuel tank cap vent is required

• For all 48 mm forks
• Ideal protection for sealing the fork
• For use with a closed fork protector

• For all 48 mm forks
• Ideal protection for sealing the fork
• For use with an open fork protector

• For all 48 mm forks
• Ideal protection for sealing the fork
• For use with an open fork protector

• Protects the lower PDS bearing against dirt permeation
• Extends the service life of the lower PDS bearing

• Made from 4mm-thick, high-strength, robust aluminum
• Extremely hard-wearing and endurance-tested for the toughest offroad use
• Precisely fitting design - specially developed for KTM models
• Highest quality workmanship
• Quick and simple installation

• Perfect fit
• Made of high-quality carbon
• Optimal protection against stone impact

• Only for Brembo systems

• Perfect fit
• Made of high-quality carbon
• Optimal protection against stone impact

• Only for Brembo systems

• CNC milled from high-strength aluminum
• Not lockable
• Extremely fast and keyless refueling

• For tank and carburetor bleeding
• Gasoline resistant
• Can only be used for bleeding purposes
• Cannot be used as a connection between tank and carburetor!

• Secure stand for your bike

• Testing, charging and keeping batteries fresh
• Fully automatic and economical battery charging by means of programmed charge characteristic
• Short-circuit protection
• Reverse polarity protection

• Can be used for several types of batteries (Pb, LiFePo4)
• Charging with a specific power control program
• Trickle charge during diagnostic or flashing the vehicle
• Recovery mode for low battery voltage (BMS, battery management system)
• Optimizes battery performance and service life
• Including power supply cable type EU

• The Bead Buddy acts as your third hand when fitting tires
• Holds the tire in the tire bed, thereby making tire fitting much easier
• Simply hook it into the spokes and away you go Particularly recommended for tire fitting with mousse.

• Easy handling and operation
• More safety
• Less wear on the cord
• Made of high quality material
• Cable not included

• 3 x short version 51012092100
• 3 x long version 51012093100

• This clever tool is a must for every motorcycle toolbox
• With it, you can remove dirt from your fork seals effortlessly
• No matter whether it's in the garage or directly at the racetrack this tool extends the life of your seals many times over
• For all 48 mm forks

• Use this to remove the dirt from your last mud battle with ease!
• A motorcycle grip rubber (not included) can be fitted to the grip.

• Makes setting the sag significantly simpler.
• Folding version for easy stowing in the tool box.

• Contains all the most-used bolts and small parts for current Offroad models
• 30 % saving compared with purchasing individual parts

• Keeps water out of the silencer during cleaning.
• For inner-diameter of 22-42 mm

• Comfortable and easy to use
• Fits all standard valves. Pressure display in bar or psi
• Integrated pressure release valve for accurate pressure adjustment
• Disengageable display and work area lighting
• Energy-saving function with automatic cut-off
• Maximum measuring pressure: 11 bar

• Highest quality workmanship
• Including straps

• It withstands a load of 180 kg.
• The total length is approx.200 cm, folded approx.100 cm.

• Practical help when loading the bike or jacking up with the rear wheel lifting device

• Stabilises the motorcycle during transport
• Protects the fork shaft sealing rings and fork springs against damage due to tension belts being tightened too much
• Is clamped between the bottom of the front fender and tyre

• Prevents dirty grips

• Protects the motorcycle from dust, scratches and the like
• The indoor bike cover makes every KTM an eye-catcher in the garage
• Completely dust and dirt-impermeable fabric
• Material with special structure
• The inside is softly padded

• Guaranteed perfect protection in all seasons
• Made of exclusive, pigmented fabric
• Includes practical carrying bag
• Protects the motorcycle from dust, scratches and the like

• Guaranteed perfect protection in all seasons
• Made of exclusive, pigmented fabric
• Includes practical carrying bag
• Protects the motorcycle from dust, scratches and the like

• This mat is already mandatory for many races
• Complies with FIM regulations
• The special material mix absorbs overflowing fuel
• The mat also facilitates the retrieval of tools, screws and other small parts during service work
• Rubberised back

• Size: 170 cm x 100 cm

• Enables secure fastening of the machine
• Protects handlebar and tank from scratches
• Made from durable ballistic nylon
• Load capacity of 280 kg
• With handlebar loops
• With rubberised hooks and carabiner on belt ends

• Provides optimum protection

• Provides optimum protection

• Made from high-tensile, durable steel
• Highest quality workmanship

• Double locking mechanism
• Locking cylinder with optimum protection against any attempts at manipulation
• Two keys supplied as standard
• Includes rotating PVC cover that protects the cylinder lock from dirt

• Made of robust material
• Pre-cut stickers