• Consistent, high-level braking performance
• Perfect dosing capacity
• Outer ring made of stainless high-performance brake steel

• No fading
• Consistent, high-level braking performance
• Perfect dosing capacity
• Greater safety in all conditions
• Floating
• No distortion
• No brake juddering
• Clear pressure point across the entire temperature range
• Inner ring anodised
• Outer ring made of stainless high-performance brake steel
• Less manual force with the same brake power
• Elegant anodised surface
• Developed for use on the race track
• Pure race feeling

• Made of high-quality carbon
• Protects the rear brake disc from stones and other solid obstacles

• Extremely light
• Made of high-quality carbon
• Highest quality workmanship
• Perfect for changing the look of your motorcycle
• Silk matte surface

• Carbon graphics kit
• Fender
• Splash protection and chainguard
• Ignition lock cover
• Spoiler left
• Spoiler right
• Fuel tank fairing inner side left
• Fuel tank fairing inner side right
• Rear fuel tank fairing

• Elegant design
• Made of robust material
• Perfect fit
• Personalise the look of your motorcycle
• Designed to completely change the original look of your motorcycle
• Can be removed without leaving any residue

• Weight saving compared to series components
• Extremely light
• Made of high-quality carbon
• Highest quality workmanship
• Perfect for changing the look of your motorcycle
• Silk matte surface

• Gets mounted on the LC8 engine next to the ignition cover

• Extremely light
• Developed for use on the race track
• Made of high-quality carbon
• Highest quality workmanship
• Perfect for changing the look of your motorcycle
• Race look
• Silk matte surface

• Made of high-quality carbon
• Highest quality workmanship
• Extremely light
• Perfect for changing the look of your motorcycle
• Developed for use on the race track
• Race look
• Silk matte surface
• Weight saving compared to series components

• Provides improved cooling of the brake and hence the brake fluid, thus counteracting fading.
• The temperature of the brake is reduced by about 10%.

• Weight saving compared to series components
• Extremely light
• Made of high-quality carbon
• Highest quality workmanship
• Perfect for changing the look of your motorcycle
• Silk matte surface

• Extremely light
• Made of high-quality carbon
• Highest quality workmanship
• Perfect for changing the look of your motorcycle
• Silk matte surface
• Windshield for the transition between headlamp and instrument cluster
• Perfectly integrated into the motorcycle
• Optimised aerodynamics
• Simplifies cleaning
• Mounting material included in scope of supply

• Weight saving compared to series components
• Extremely light
• Made of high-quality carbon
• Highest quality workmanship
• Perfect for changing the look of your motorcycle
• Silk matte surface

• Extremely light
• Made of high-quality carbon
• Highest quality workmanship
• Perfect for changing the look of your motorcycle
• Weight saving compared to series components
• Silk matte surface
• Designed to completely change the original look of your motorcycle
• Glue the graphics kit directly onto the standard fairing parts
• Can be removed without leaving any residue
• Made of the highest quality materials
• Perfect fit
• Personalise the look of your motorcycle

• Extremely light
• Made of high-quality carbon
• Highest quality workmanship
• Perfect for changing the look of your motorcycle
• Weight saving compared to series components
• Silk matte surface

• Extremely light
• Made of high-quality carbon
• Highest quality workmanship
• Perfect for changing the look of your motorcycle
• Weight saving compared to series components
• Silk matte surface

• High stiffness and strength
• Made of high-quality carbon
• Perfect fit
• Highest quality workmanship
• Perfect for changing the look of your motorcycle
• Silk matte surface

• Highest quality workmanship
• Silk matte surface
• Race look in a few seconds
• Plug & Play mounting
• Extremely light
• Perfect for changing the look of your motorcycle
• Made of high-quality carbon
• Weight saving compared to series components

• Made of high-quality carbon
• Weight saving compared to series components
• Highest quality workmanship
• Extremely light
• Perfect for changing the look of your motorcycle
• Silk matte surface

• Extremely light
• Made of high-quality carbon
• Highest quality workmanship
• Perfect for changing the look of your motorcycle
• Weight saving compared to series components
• Silk matte surface

• Extremely light
• Made of high-quality carbon
• Highest quality workmanship
• Perfect for changing the look of your motorcycle
• Weight saving compared to series components
• Silk matte surface

• Permanent protection against unattractive scratches and matte spots on the swingarm
• Extremely light
• Developed for use on the race track
• Made of high-quality carbon
• Highest quality workmanship
• Perfectly integrated into the motorcycle
• Perfect fit
• Silk matte surface
• Protects from damage in the event of a fall

• Made of high-strength aluminum
• Elegant anodised surface

• Closed cartridge technology
• Better response
• Reduced tire wear
• Greater confidence in all situations
• Improved damping behavior
• Finer adjustment options
• Technology from the Supersport World Championship
• Motorsport expertise for the street
• All adjustments can be made externally
• Adjustable spring preload
• Adjustable rebound damping
• Adjustable compression damping

• Cartridge incl. 9.0, 9.5 und 10 N/mm fork spring
• Spring spacer
• Sticker
• Tools

• Closed cartridge technology
• Better response
• Reduced tire wear
• Greater confidence in all situations
• Improved damping behavior
• Finer adjustment options
• Technology from the Supersport World Championship
• Motorsport expertise for the street
• All adjustments can be made externally
• Adjustable spring preload
• Adjustable rebound damping
• Adjustable compression damping

• Spring fork incl. 9.0 N/mm fork spring
• Sticker
• Tools

• Technology from the Supersport World Championship
• Motorsport expertise for the street
• Separate high and low-speed compression damping
• Optimal oil circulation
• Excellent cooling properties
• Better response
• Improved feel for rear tires
• Later braking and earlier acceleration possible
• Reduced tire wear
• Greater confidence in all situations

• Shock absorber incl. 90 N/mm shock spring
• Sticker
• Tools

Color differences between the upper and lower triple clamp cannot be technically ruled out.

• CNC milled aluminum triple clamp
• Made of high-strength aluminum
• Elegant anodised surface
• Stiffer than the standard triple clamp
• Lighter than the standard triple clamp
• More precise handling during hard braking maneuvers
• Better pressure distribution in the clamping area of the fork
• Perfect for use on the race track

• CNC milled from high-strength aluminum
• Elegant anodised surface

• CNC milled from high-strength aluminum
• Elegant anodised surface

• CNC milled from high-strength aluminum
• Elegant anodised surface

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Visual highlight

These high-quality aluminum CNC components feature a superior abrasion-resistant eloxal coating and make a bold visual statement.

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Visual highlight

These high-quality aluminum CNC components feature a superior abrasion-resistant eloxal coating and make a bold visual statement.

• CNC milled from high-strength aluminum
• Not lockable
• Extremely fast and keyless refueling

These high-quality aluminum CNC components feature a superior abrasion-resistant eloxal coating and make a bold visual statement.

• CNC milled from high-strength aluminum
• Elegant anodised surface

• CNC milled from high-strength aluminum
• Elegant anodised surface

• CNC milled from high-strength aluminum
• Elegant anodised surface

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Includes drilling for safety wire

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Includes drilling for safety wire

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Includes drilling for safety wire

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Includes drilling for safety wire

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Includes drilling for safety wire

• No new engine flashing necessary
• Made from high grade titanium
• Sporty sound
• Carbon silencer cap
• Laser-engraved logo
• Lighter than series components
• Plug & Play mounting
• Race look

• Optimum manifold guidance
• Greater performance due to special engine mapping
• Great sound
• Uncompromising race look
• Manufactured entirely from high-grade titanium
• Complies with current FIM noise regulations
• Better response
• Significantly more torque
• Substantial weight saving
• Developed for use on the race track
• High-quality look
• Highest quality workmanship

• The weight of the Akrapovič „Evolution Line" exhaust system is just 3.8 kg.
• Compared to the standard exhaust system it offers a weight saving of 6.4 kg!!
• The power gets increased by 5 hp.
• Noise level of this exhaust system: 104,9 dB(A)
• Static noise measurement like performed on race tracks (at 5.000 rpm)
• The Akrapovič-kit „Evolution Line" can only be used in combination with the specific engine mapping. It is technical wise not possible to use this specific engine mapping respectively the Akrapovič „Evolution Line" exhaust system on the public road.
• All indicators need to get disconnected before the engine can be started.

• No new engine flashing necessary
• Sporty sound
• Stainless steel outer sleeve and interior
• Uncompromising race look
• Highest quality workmanship
• Laser-engraved logo
• Plug & Play mounting

• CNC milled from high-strength aluminum
• Elegant anodised surface
• The adjustability offers the right ergonomics for every rider
• Secure grip due to knurling
• Enables increased tilting freedom
• Carbon heel protectors included in delivery
• Sportier ergonomics
• Reverse shifting pattern possible
• Developed for use on the race track
• An absolute must for every ambitious biker
• Highest quality workmanship
• High-quality look
• Laser-engraved logo
• Visual highlight with technical and ergonomic added value
• Race look

• Adjustable to 12 different positions
• Standard position of the footpegs is the same like on the serial footpeg system
• Can be moved 24 mm upwards and also 8,5 mm or 17 mm backwards
• The complete footpeg system can be twisted 12° upwards by using the alternative mounting point on the frame. This gives you more positions for the footpeg

• Warm hands, no matter what the weather
• Operation using the menu switch on the handlebar
• Grip temperature adjustable in 4 steps

• An absolute must for every ambitious biker
• Perfect for use on the race track
• Improved response
• Optimally adapted to your motorcycle
• Plug & Play mounting

• Angle for the throttle twist grip is limited to 65°, this results in a more direct feeling of the throttle.
• Standard grip needs to be used
• Can also be used in combination with the heated grip kit

• Protection of the lever in case of unintentional ground contact
• No unintentional operation of the lever if contact is made with another rider/vehicle
• Easy exchange for the standard handlebar weight
• Lever protection made of shatterproof plastic
• Handlebar attachment made of high-grade cast aluminum material
• Plastic protective bracket is individually replaceable

• Protection of the lever in case of unintentional ground contact
• No unintentional operation of the lever if contact is made with another rider/vehicle
• Easy exchange for the standard handlebar weight
• Lever protection made of shatterproof plastic
• Handlebar attachment made of high-grade cast aluminum material
• Plastic protective bracket is individually replaceable

• Exceptionally robust
• Already mandatory in many competitions
• CNC milled from high-strength aluminum
• Elegant anodised surface
• Developed for use on the race track
• Race look
• Disassembly/assembly in seconds
• Protection of the lever in case of unintentional ground contact
• No unintentional operation of the lever if contact is made with another rider/vehicle
• Easy exchange for the standard handlebar weight

• Extremely light
• Made of high-quality carbon
• Highest quality workmanship
• Visual highlight
• Race look
• Silk matte surface
• Protection of the lever in case of unintentional ground contact
• No unintentional operation of the lever if contact is made with another rider/vehicle
• Easy exchange for the standard handlebar weight

• Already mandatory in many competitions
• Extremely light
• Made of high-quality carbon
• Highest quality workmanship
• Visual highlight
• Race look
• Silk matte surface
• Protection of the lever in case of unintentional ground contact
• No unintentional operation of the lever if contact is made with another rider/vehicle
• Easy exchange for the standard handlebar weight

• Same brake lever protection as it is used on the MotoGP bike

• Excellent weather protection
• Perfect for changing the look of your motorcycle
• Exceptionally robust
• Protection of the lever in case of unintentional ground contact

• Protects display from unwanted scratches and marks
• Made of high-grade, anti-scratch material

• 2 x Ultra-Clear display protection sticker
• 1 x Squeegee / Smoothing card
• 1 x Suede polishing cloth
• 1 x Dust removal strip

• Modern and simple design
• Increased safety due to extremely bright flashing light
• Plug & Play mounting
• High-quality look
• Integrate perfectly into the vehicle design

• Dynamic light sequence
• Small design: width approx. 18 mm, length approx. 72 mm
• Contains 2 turn signal incl. fitting material

• High-quality look
• Integrate perfectly into the vehicle design
• Modern and simple design
• Plug & Play mounting
• Increased safety due to extremely bright flashing light

• Dynamic light sequence
• Small design: width approx. 18 mm, length approx. 72 mm
• Contains 4 turn signal incl. fitting material

• An absolute must for every ambitious biker
• Substantial weight saving
• Tested in complex and specially-developed test cycles
• Perfect for use on the race track
• Plug & Play mounting
• Unbeatable cost/weight saving ratio
• Mountable in any position, as it does not contains acid
• Safe technology and long life

Recommended charging current - 4.0 amps
Maximum charge current for fast charging - 32 amps

• Easily accessible
• Mounting material included in scope of supply
• With protective cover
• Output voltage 5 V/1,000 mA

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Visual highlight with technical and ergonomic added value
• Adjustable grip width
• Flaps removed on ground contact
• Prevents broken levers
• Extremely light
• Perfect for use on the race track

• Extremely light
• CNC milled from high-strength aluminum
• Elegant anodised surface
• Visual highlight with technical and ergonomic added value
• Adjustable grip width
• Flaps removed on ground contact
• Prevents broken levers
• Perfect for use on the race track

• Developed for use on the race track
• Race look

• To adjust the width of the brake lever with the left hand during riding

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Integrate perfectly into the vehicle design
• Ball joint, for flexible adjustment of the rear mirror
• Including adapter for mounting
• Suitable for the left and right side

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Integrate perfectly into the vehicle design
• Visual highlight
• Suitable for the left and right side
• Ball joint, for flexible adjustment of the rear mirror
• Including adapter for mounting

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Integrate perfectly into the vehicle design
• Visual highlight
• Ball joint, for flexible adjustment of the rear mirror
• Including adapter for mounting

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Integrate perfectly into the vehicle design
• Ball joint, for flexible adjustment of the rear mirror
• Including adapter for mounting
• Suitable for the left and right side

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Modern, subtle, and timeless design
• Adjustable handle
• Ball joint, for flexible adjustment of the rear mirror
• Suitable for the left and right side
• Glassless mirror - aluminium itself is the mirror surface
• Mirror body very thin, light and without edge

• 180 mm stem

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Modern, subtle, and timeless design
• Ball joint, for flexible adjustment of the rear mirror
• Adjustable handle

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Modern, subtle, and timeless design
• Adjustable handle
• Ball joint, for flexible adjustment of the rear mirror
• Suitable for the left and right side
• Mirror body very thin, light and without edge
• Glassless mirror - aluminium itself is the mirror surface

• 180 mm stem

• Developed for use on the race track
• Prevents unpleasant handlebar hits
• High-end WP suspension steering damper
• Tested in the IDM and Moto3™

• Damping adjustable in 30 clicks
• Damping can be adjusted directly on the piston which allowes an extremely slim design
• Piston offers a special chrome-alloy coating which results in very low coefficient of friction

• Robust and waterproof bag
• Waterproof roll closure
• Welded seams
• Ideal combination of quality and all-round usability
• Including all required assembly materials

• Made of the highest quality materials
• Elegant design
• Custom design
• Extremely robust fasteners, with large zip pullers
• Rain cover included
• PVC-coated zipper

• Easy mounting on top of the pillion seat
• No additional carrier needed
• All-round expandable volume increases capacity from 10L to 16L

• Easy mounting without changing the passenger footpegs
• Easy fastening of the side bag set

• Nearly invisible with side bags removed

• Elegant design
• Integrate perfectly into the vehicle design
• Disassembly/assembly in seconds
• Developed together with the vehicle
• Extremely low weight
• Sufficient storage space for a big vacation tour
• Waterproof inner bags included
• No restriction for the passenger, enough space for the legs

• Extremely robust fasteners, with large zip pullers
• Ideal combination of quality and all-round usability
• Rain cover included
• Carrying strap included
• Map pocket and individual compartments
• Mounting with supplied straps

• Manufactured from durable nylon, with abrasion-resistant edging made from reflective material

• Optimal solution for quick and secure fastening of your smartphone on the vehicle
• Universal and inconspicuous bracket for your smartphone

Includes also a anti vibration module which decouples the smartphone from the smartphone bracket respectively the motorcycle with a specific developed elastomer inlay.
It reduces the transfer of vibrations, generated by the motorcycle, to the smartphone and protects it`s sensitive components.

New "SPC+" mounting system.
In addition, this version also includes the new technologie "Mag-Align", which makes it easier to position the smartphone correctly on the bracket.

• Universal and inconspicuous bracket for your smartphone
• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• Can be clamped on the handlebar (including different adapter).
• The arm can be rotated in any position for the perfect position for your smartphone.
• Includes also a anti vibration module which decouples the smartphone from the bracket / motorcycle with a specific developed elastomer inlay.
• It reduces the transfer of vibrations, generated by the motorcycle, to the smartphone and protects it`s sensitive components.

• Smartphone can be easily removed with its cover
• Protects your valuable smartphone
• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• Optimal solution for quick and secure fastening of your smartphone on the vehicle
• Smartphone can be easily removed with its cover
• Protects your valuable smartphone

Including a magnetic ring, so the case is also "MagSafe" compatible.

Extremely slim design, 40% thinner compared to the previous smartphone case generation.

• Smartphone can be easily removed with its cover
• Protects your valuable smartphone
• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• Smartphone can be easily removed with its cover
• Protects your valuable smartphone
• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• Smartphone can be easily removed with its cover
• Protects your valuable smartphone
• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• Smartphone can be easily removed with its cover
• Protects your valuable smartphone
• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• Smartphone can be easily removed with its cover
• Protects your valuable smartphone
• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• Optimal solution for quick and secure fastening of your smartphone on the vehicle

New "SPC+" mounting system, but there is also an adapter included to mount this universal adapter also on the previous mounting system

Dimensions: 66x55mm (2.6x2.17 inch).

• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• Dimensions: 66x55mm (2.6x2.17 inch)

• Optimal solution for quick and secure fastening of your smartphone on the vehicle
• Protects your valuable smartphone from rain, dust or mud
• Touchscreen remains fully functional

• Optimal solution for quick and secure fastening of your smartphone on the vehicle
• Protects your valuable smartphone from rain, dust or mud
• Touchscreen remains fully functional

• Protects your valuable smartphone from rain, dust or mud
• Optimal solution for quick and secure fastening of your smartphone on the vehicle
• Touchscreen remains fully functional

• Fast and easy inductive charging of the smartphone during the ride
• Can be mounted on the SPC+ smartphone bracket and smartphone adapter
• Including waterproof USB-A charging cable, only this cable shall be used for the connection with the bike
• Dimensions: 60 mm (diameter) x 12 mm (height)

• Easily accessible and within the rider's field of vision

• Fast and easy inductive charging of the smartphone during the ride
• Can be mounted on the SPC+ smartphone bracket and smartphone adapter
• Including waterproof USB-C charging cable, only this cable shall be used for the connection with the bike
• Dimensions: 60 mm (diameter) x 12 mm (height)

• Protects your valuable smartphone
• Optimal solution for quick and secure fastening of your smartphone on the vehicle
• Smartphone can be easily removed with its cover

Including a magnetic ring, so the case is also "MagSafe" compatible.

Extremely slim design, 40% thinner compared to the previous smartphone case generation.

• Made of the highest quality materials
• Elegant design
• Perfectly integrated into the motorcycle
• Disassembly/assembly in seconds
• Fastening with Quicklock system
• Extremely robust fasteners, with large zip pullers
• Rain cover included
• Carrying strap included
• PVC-coated zipper

• All-round expandable volume increases capacity from 5L to 9L

• Plug & Play mounting

• Wiring harness ready for fitting
• Fail-safe, dual-circuit immobiliser
• Integrated microchip motion sensor
• Two watertight, anti-scan radio transmitters with rolling code
• An additional mounting kit is required for installation
• Thatcham homologated (strictest European test method)

• Includes all the necessary parts for mounting securely in the vehicle

• Exceptionally robust
• Provides optimum protection
• Perfectly integrated into the motorcycle
• Extremely resistant fastening system
• Plastic-coated tubular steel brackets

• Protects from damage in the event of a fall
• Easy to mount

• Protects from damage in the event of a fall
• Easy to mount
• Plug & Play mounting
• Elegant anodised surface
• CNC milled from high-strength aluminum
• High-quality look
• Perfect fit

• Protects from damage in the event of a fall
• Easy to mount
• Plug & Play mounting
• Elegant anodised surface
• CNC milled from high-strength aluminum
• High-quality look
• Perfect fit

• Permanent protection against unattractive scratches and matte spots on the swingarm
• Protects from damage in the event of a fall
• Made from special, high-strength plastic for maximum stability
• Exceptionally robust
• Perfect fit
• Perfectly integrated into the motorcycle
• Developed for use on the race track

• Protects the engine cover from damage
• Specifically adapted to the shape of the engine cover
• Made from special, high-strength plastic for maximum stability
• Exceptionally robust
• Developed for use on the race track

• Protects the engine cover from damage
• Specifically adapted to the shape of the engine cover
• Made from special, high-strength plastic for maximum stability
• Exceptionally robust
• Developed for use on the race track

• Elegant design
• High-quality look
• Perfect fit
• Plug & Play mounting

• Elegant design
• Suitable for long-distance travel
• High-quality look
• Perfect fit
• Plug & Play mounting
• The 3D structure mesh special foam ensures even pressure distribution, thus enhancing the seating comfort
• The optimised shape offers more legroom and better contact with the motorcycle
• Custom designed seat for an uncompromising look
• Same seat height like the standard seat

• Integrate perfectly into the vehicle design
• Great opportunity to convert the motorcycle from a two-seater to a one-seater
• Race look

• High-end electronics detect emergency braking based on speed and deceleration values
• If emergency braking is detected, the brake light flashes until the brake is released
• A flashing light is noticed more quickly, that`s a big gain in safety
• Minimizes risk of a rear-end collision

• The motor slip regulation (MSR) works counter to the motorcycle traction control (MTC)
• If the motor slip regulation is too high due to rapid downshifting or abrupt throttle reduction, the Ride-by-Wire system opens the throttle valve exactly enough to prevent the rear wheel from drifting away
• Thanks to MSC support, this system also works depending on the cornering angle