• Acts as an additional protective layer
• Recommended for extremely dusty conditions
• Easy cleaning
• Washable
• Pre-oiled
• Tested in the toughest conditions

• Just in combination with a single piece seat mountable

• Premature sanding of the air filter is avoided

• With return valve
• Anodised dust protection cap
• Quick and easy bleeding of the brake

• Provides improved fuel tank protection
• Elegant look
• Weight saving compared to series components
• Extremely light
• Made of high-quality carbon
• Highest quality workmanship
• Visual highlight
• Perfect for changing the look of your motorcycle
• Silk matte surface

• Constant and permanent lubrication
• Extends chain life
• Perfectly integrated into the motorcycle
• Practical companion for national and international trips
• Recommended for long journeys
• Easy handling and operation
• Offers more comfort during long journeys
• Including all required assembly materials

• Automatic chain oiling system
• The system is working with vacuum, which gets created when the engine is running
• The amount of oil can be regulated by a small adjustment wheel
• One 250 ml bottle of green Scottoil is included in the kit (enough oil to cover up to 8.000 km)
• The green Scottoil is made for all climates and biodegradable

• Teeth made of high-strength steel, for an extra long service life
• Aluminum center section, reduces unsprung masses
• Permanently joined together with high-strength rivets
• At least three times longer service life than other aluminum rear sprockets
• 50 % lighter than steel rear sprockets
• Longer service life of the entire drivetrain kit

• Teeth made of high-strength steel, for an extra long service life
• Aluminum center section, reduces unsprung masses
• Permanently joined together with high-strength rivets
• At least three times longer service life than other aluminum rear sprockets
• 50 % lighter than steel rear sprockets
• Longer service life of the entire drivetrain kit

• Teeth made of high-strength steel, for an extra long service life
• Aluminum center section, reduces unsprung masses
• Permanently joined together with high-strength rivets
• At least three times longer service life than other aluminum rear sprockets
• 50 % lighter than steel rear sprockets
• Longer service life of the entire drivetrain kit

• Secure stand for your bike
• Facilitates chain maintenance

• Secure stand for your bike
• Facilitates chain maintenance

• Secure stand for your bike
• Specifically for soft surfaces such as sand

• 25 mm lower seat height
• No restrictions on riding dynamics
• Developed together with the vehicle

• CNC milled aluminum triple clamp
• Elegant anodised surface
• Lighter than the standard triple clamp
• Visual highlight

Color differences between the upper and lower triple clamp cannot be technically ruled out.

• CNC milled aluminum triple clamp
• Elegant anodised surface
• Visual highlight
• Lighter than the standard triple clamp

Color differences between the upper and lower triple clamp cannot be technically ruled out.

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Visual highlight
• Plug & Play mounting

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Visual highlight

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Visual highlight

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Visual highlight

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Visual highlight
• Plug & Play mounting

• Covers the bolt conection at the frame

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Visual highlight

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Visual highlight

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Visual highlight

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Visual highlight

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Visual highlight
• Includes drilling for safety wire

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Visual highlight
• Includes drilling for safety wire

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Visual highlight

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Visual highlight
• Includes drilling for safety wire

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Visual highlight
• Includes drilling for safety wire

• Protection for the header
• Protection against rapid overheating of the engine in muddy conditions

• Extension of the skid plate
• Closes the gap between skid plate and radiator protection grille

• Perfect protection for your radiator
• Provides maximum protection at the lowest possible weight
• Perfectly integrated into the motorcycle
• Perfect fit
• High-quality look
• Optimal protection against stone impact

• Easy to mount
• Made of robust material
• Optimal protection against stone impact
• Visual highlight
• Perfect for changing the look of your motorcycle
• Race look

• No new engine flashing necessary
• Made from high grade titanium
• Sporty sound
• Substantial weight saving
• Lighter than series components
• Plug & Play mounting
• Race look

• Weight saving approx. 1 kg.
• Look of the multiple Dakar winning rally bikes

• Made from high grade titanium
• Laser-engraved logo
• Sporty sound
• Optimum combination of weight saving, durability and top performance/price ratio
• Plug & Play mounting
• No new engine flashing necessary

• Absorbs the blows of off-road riding
• Fatigue-free standing riding
• Offers more comfort during long journeys

• Ride like our multiple Dakar winners
• Enlarged tread area
• More control
• Fatigue-free standing riding

• Warm hands, no matter what the weather
• Grip temperature adjustable in 4 steps

• Warm hands, no matter what the weather
• Grip temperature adjustable in 4 steps
• Operation using the menu switch on the handlebar

• An absolute must for every ambitious biker
• Perfect for use on the race track
• Improved response
• Optimally adapted to your motorcycle
• Plug & Play mounting

• Angle for the throttle twist grip is limited to 65°, this results in a more direct feeling of the throttle.
• Standard grip needs to be used
• Can also be used in combination with the heated grip kit

• Closed design
• 2-component plastic handguard
• Black middle section = maximum strength for optimum protection
• Colored top and bottom parts = highly flexible under the roughest conditions
• Available in two different heights
• Improved optics

• Excellent weather protection
• Maximum protection against falls, flying stones, branches, etc.
• Indispensable companion for heavy off-road and Supermoto use
• Wide, generous design in combination with sturdy aluminum bracket
• Prevents broken levers

• Excellent weather protection
• Maximum protection against falls, flying stones, branches, etc.
• Indispensable companion for heavy off-road and Supermoto use
• Wide, generous design in combination with sturdy aluminum bracket
• Prevents broken levers

• Excellent weather protection
• Maximum protection against falls, flying stones, branches, etc.
• Indispensable companion for heavy off-road and Supermoto use
• Wide, generous design in combination with sturdy aluminum bracket
• Prevents broken levers

• Excellent weather protection
• Closed design
• 2-component plastic handguard
• Black middle section = maximum strength for optimum protection
• Colored top and bottom parts = highly flexible under the roughest conditions
• Improved optics

• Closed design
• 2-component plastic handguard
• Black middle section = maximum strength for optimum protection
• Colored top and bottom parts = highly flexible under the roughest conditions
• Available in two different heights
• Improved optics

• Closed design
• 2-component plastic handguard
• Black middle section = maximum strength for optimum protection
• Colored top and bottom parts = highly flexible under the roughest conditions
• Available in two different heights
• Improved optics

• Excellent weather protection
• Closed design
• 2-component plastic handguard
• Black middle section = maximum strength for optimum protection
• Colored top and bottom parts = highly flexible under the roughest conditions
• Improved optics

Included in the kit are 2x handlebar support lower parts and 2x fastening bolts.
The upper parts and bolts required for clamping the handlebar are taken from the original handlebar support.

• CNC milled handlebar mount with damping rubber inserts
• Gentle on wrists and shoulder joints
• Damping of hard shocks
• Absorption of chassis and engine vibrations
• Additional handlebar damping in horizontal direction
• Optimum steering precision
• Further dampers available in three different degrees of hardness (soft, medium, hard) for individual adjustment

• Handlebar height adjustable to 2 positions

• Each headlight has an 8 watt power consumption and light intensity of 4400 lumens
• Optimal illumination of road surface due to wide light angle
• Increased safety when riding at night
• Housing made of plastic and black powder-coated aluminum

• Very small design: 70mm x 61mm diameter
• One lamp weighs 485 gramms
• Optional a USB power outlet can be mounted directly to the relais bracket

• Protects display from unwanted scratches and marks
• Made of high-grade, anti-scratch material

• 2 x Ultra-Clear display protection sticker
• 1 x Squeegee / Smoothing card
• 1 x Suede polishing cloth
• 1 x Dust removal strip

• Modern and simple design
• CNC milled from high-strength aluminum
• Elegant anodised surface
• Increased safety due to extremely bright flashing light

• LED SMD technology
• Increased safety due to extremely bright flashing light
• CNC milled from high-strength aluminum
• Elegant anodised surface
• Integrate perfectly into the vehicle design

• Extremely small design: diameter approx. 14 mm, length approx. 55 mm
• Contains 1 turn signal incl. resistance and fitting material

• LED SMD technology
• Increased safety due to extremely bright flashing light
• CNC milled from high-strength aluminum
• Elegant anodised surface
• Integrate perfectly into the vehicle design

• Extremely small design: diameter approx. 14 mm, length approx. 55 mm
• Contains 4 turn signal incl. resistance and fitting material

• Modern and simple design
• CNC milled from high-strength aluminum
• Elegant anodised surface
• Increased safety due to extremely bright flashing light

• Cylindrical pair of indicators that completely blend with motorcycle design lines
• CNC milled aluminum housing
• Black anodized
• Modern lighting technology

• An absolute must for every ambitious biker
• Substantial weight saving
• Tested in complex and specially-developed test cycles
• Perfect for use on the race track
• Plug & Play mounting
• Unbeatable cost/weight saving ratio
• Mountable in any position, as it does not contains acid
• Safe technology and long life

• With protective cover
• Easily accessible
• Convenient and easy to use

• Power supply for the navigation system or any other use.
• Output voltage/current: 5V / 2000 mA
• Quick Charge 2.0

• With protective cover
• Output voltage 5 V/1,000 mA
• Easily accessible
• Mounting material included in scope of supply

• Easily accessible
• Mounting material included in scope of supply
• With protective cover
• Output voltage 5 V/1,000 mA

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Visual highlight with technical and ergonomic added value
• Adjustable grip width
• Adjustable lever length
• Flaps removed on ground contact
• Prevents broken levers
• Extremely light

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Visual highlight with technical and ergonomic added value
• Adjustable grip width
• Adjustable lever length
• Flaps removed on ground contact
• Prevents broken levers
• Extremely light

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Visual highlight
• Modern, subtle, and timeless design
• Adjustable handle
• Ball joint, for flexible adjustment of the rear mirror
• Suitable for the left and right side
• Glassless mirror - aluminium itself is the mirror surface
• Mirror body very thin, light and without edge

• 180 mm stem

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Visual highlight
• Modern, subtle, and timeless design
• Adjustable handle
• Ball joint, for flexible adjustment of the rear mirror
• Suitable for the left and right side
• Mirror body very thin, light and without edge
• Glassless mirror - aluminium itself is the mirror surface

• 180 mm stem

• High-end steering damper
• Maximum control on fast tracks
• Gain in stability at the front wheel
• Fully adjustable
• Well thought-out mounting of the damper enables individual handlebar adjustment
• Reduced weight
• Sensitive response behavior
• High speed DCC
• Developed according to the requirements of our factory drivers

• Optimum 25 click setting range.
• Proven success with the KTM Works Rally Team.
• For use on Enduro MY21 and later (EU Version), the Factory fuel tank cap vent is required

• Needed to mount the steering damper

• Offers more comfort to the passenger

• Offers more comfort to the passenger

• Offers more comfort to the passenger

• Offers more comfort to the passenger

• Exceptionally robust
• Optimum load transfer via existing mounting points on the chassis
• Easy mounting without changing the passenger footpegs

• Optimum load transfer via existing mounting points on the chassis
• Easy mounting without changing the passenger footpegs

• Floated mounted cases avoid oscillation of the bike at high speed

• The clever option for the luggage case system, your luggage is always close at hand
• The cases can stay mounted on the bike

• Resistant waterproof coating
• Waterproof roll closure
• Protects your valuables from moisture and dust

• The clever option for the luggage case system, your luggage is always close at hand
• The cases can stay mounted on the bike

• Resistant waterproof coating
• Waterproof roll closure
• For waterproof storage of documents, maps, cellphones, navigation devices etc.

• Robust and waterproof bag
• Waterproof roll closure
• Welded seams
• Ideal combination of quality and all-round usability
• Including all required assembly materials

• Robust and waterproof bag
• Waterproof roll closure
• Welded seams
• Ideal combination of quality and all-round usability
• Including all required assembly materials

• Robust and waterproof bag
• Waterproof roll closure
• Welded seams
• Ideal combination of quality and all-round usability
• Including all required assembly materials

• Extra large top case carrier, e.g. for transporting luggage rolls

• Not suitable for mounting a top case
• Max. load 5 kg

• Extremely robust fasteners, with large zip pullers
• PVC-coated zipper
• Made of the highest quality materials
• Elegant design
• Custom design
• Rain cover included

• Easy mounting on top of the pillion seat
• No additional carrier needed
• All-round expandable volume increases capacity from 24L to 36L

• Extremely robust fasteners, with large zip pullers
• Ideal combination of quality and all-round usability
• Backpack function, with very high-quality back section and shoulder straps
• Storage compartment for the U-lock
• Rain cover included

• Shoulder straps will be used for mounting the bag on the motorcylce
• For fixing the bag on the 1290 Super Duke GT, 790 Duke and 890 Duke /R it is recommended to mount the grips for the pillion
• All-round expandable volume increases capacity from 16 l to 32 l

• Extremely robust fasteners, with large zip pullers
• Ideal combination of quality and all-round usability
• Rain cover included
• Carrying strap included
• Map pocket and individual compartments
• Mounting with supplied straps

• Manufactured from durable nylon, with abrasion-resistant edging made from reflective material

• Fastening with Quicklock system
• Disassembly/assembly in seconds
• Made of the highest quality materials
• Map pocket and individual compartments
• Extremely robust fasteners, with large zip pullers
• Rain cover included
• Carrying strap included

• Accommodates two integral helmets
• Practical snap-fit closing
• Combination lock to open the cover and unlock the fastening
• Easy handling and operation
• Mounting material included in scope of supply
• Practical companion for national and international trips
• Sufficient storage space for a big vacation tour
• Bezels painted in vehicle color

• Dimensions 610 mm x 460 mm x 310 mm

• Accommodates two integral helmets
• Practical snap-fit closing
• Combination lock to open the cover and unlock the fastening
• Easy handling and operation
• Mounting material included in scope of supply
• Practical companion for national and international trips
• Sufficient storage space for a big vacation tour
• Bezels painted in vehicle color

• Dimensions 610 mm x 460 mm x 310 mm

• Accommodates two integral helmets
• Practical snap-fit closing
• Combination lock to open the cover and unlock the fastening
• Easy handling and operation
• Mounting material included in scope of supply
• Practical companion for national and international trips
• Sufficient storage space for a big vacation tour
• Bezels painted in vehicle color

• Dimensions 610 mm x 460 mm x 310 mm

• Accommodates two integral helmets
• Practical snap-fit closing
• Combination lock to open the cover and unlock the fastening
• Easy handling and operation
• Mounting material included in scope of supply
• Practical companion for national and international trips
• Sufficient storage space for a big vacation tour
• KTM logo included

• The height of the top case can be fixed at three different positions. The capacity will be: 46L / 52L / 58L

• Accommodates two integral helmets
• Practical snap-fit closing
• Combination lock to open the cover and unlock the fastening
• Easy handling and operation
• Mounting material included in scope of supply
• Practical companion for national and international trips
• Sufficient storage space for a big vacation tour
• Bezels painted in vehicle color

• Dimensions 610 mm x 460 mm x 310 mm

• Easy to mount
• Robust, solid construction
• Including all required assembly materials
• Optimum load transfer via existing mounting points on the chassis

• Easy to mount
• Robust, solid construction
• Including all required assembly materials
• Optimum load transfer via existing mounting points on the chassis

• Easy to mount
• Robust, solid construction
• Including all required assembly materials
• Optimum load transfer via existing mounting points on the chassis

• The basis for the assembly of our luggage bags or top cases
• Easy to mount
• Robust, solid construction
• Including all required assembly materials
• Optimum load transfer via existing mounting points on the chassis

• Exceptionally robust
• Resistant to the toughest stresses and strains
• Easy handling and operation
• Easy to mount
• Extremely torsion-resistant
• Extremely durable
• Suitable for long-distance travel
• Made of high-strength aluminum
• The corners are made of impact-resistant plastic
• Permanently and tightly connected to each other by a special riveting process

• Body made from 1.5 mm thick
• Built-in locks (not included in delivery) can be retrofitted without the need for drills or files
• Dimensions: 443 mm x 283 mm x 393 mm
• Load: 10 kg

• Made of high-strength aluminum
• The corners are made of impact-resistant plastic
• Easy to mount
• Easy handling and operation
• Exceptionally robust
• Extremely torsion-resistant
• Extremely durable
• Suitable for long-distance travel
• Resistant to the toughest stresses and strains
• Permanently and tightly connected to each other by a special riveting process

• Body made from 1.5 mm thick
• Built-in locks (not included in delivery) can be retrofitted without the need for drills or files
• Dimensions: 443 mm x 203 mm x 393 mm
• Load: 10 kg

• Made of high-strength aluminum
• Elegant anodised surface
• Easy handling and operation
• Easy to mount
• Elegant design
• Exceptionally robust
• Extremely torsion-resistant
• Extremely durable
• Suitable for long-distance travel
• Resistant to the toughest stresses and strains
• Permanently and tightly connected to each other by a special riveting process
• Proven silicone seal - for a pannier that's dry on the inside, even in the pouring rain

• Body made from 1.5 mm thick aluminum
• Glass fibre reinforced plastic parts are protecting the corners of the case
• Quick mounting with just one lever at the outside of the case
• Integrated handle
• Dimensions: 443 mm x 203 mm x 393 mm
• Load: 10 kg
• Locking cylinder for locking the lid are already included in the kit
• The hooks for locking the lid are already included