• Orange with KTM logo
• 50 mm wide & 99 m long

• CNC milled from high-strength solid aluminum
• Chrome-plated pad guide pins on the brake caliper
• The benefits:
  
  • Reduced brake pad canting, hence no uneven wear
  • Constant braking feel, irrespective of brake pad wear or temperature
  • No vibration from the brake

Fitting possible on SX/EXC models without adapter, with the original hand pump and brake hose.
Can only be fitted with a 17"or 16.5" front wheel. 310 mm brake disc 586.09.060.000 or 250.09.260.000 required.
In combination with brake disc 25009260000 (310 mm) no speedometer signal will be sent.

• Clear pressure point across the entire temperature range
• More brake power
• Higher stiffness with the same weight
• Made of high-strength aluminum

• Floating
• Outer ring made of stainless high-performance brake steel
• Inner ring anodised
• Minimal wear on brake pads

• With return valve
• Anodised dust protection cap
• Quick and easy bleeding of the brake

• With return valve
• Anodised dust protection cap
• Quick and easy bleeding of the brake

• Protects the brake disc in the event of a fall
• High stiffness and strength
• Protects the rear brake disc from stones and other solid obstacles
• CNC milled from high-strength aluminum
• Lighter than series components

• CNC milled from high-strength aluminum
• Elegant anodised surface

• Protects the brake pedal from bending by branches

• For all 48 mm forks
• Made of high-quality carbon

• Specially developed for use in motocross
• No O- or Z-rings > minimum loss of power and good durability

• Specially developed for use in motocross
• No O- or Z-rings > minimum loss of power and good durability

• Prevents the chain from hitting the rear tyre
• Perfect chain guide, no branches drawn in between chain and engine housing

• Significantly longer durability
• Teeth made of high-strength steel, for an extra long service life
• Extremely low-wear
• Recommended for long journeys

• Specially designed for the challenges of off-road use
• Significantly longer durability
• Made of high-strength aluminum
• The right combination of look, style, and performance

• The lightest Renthal Sprocket on the market
• Provide maximum power transfer and long-life due to advanced tooth profile and perfect concentricity
• Combination of a high strength base material and exceptionally hardwearing surface

• Specially designed for the challenges of off-road use
• Significantly longer durability
• Made of high-strength aluminum
• The right combination of look, style, and performance

• The lightest Renthal Sprocket on the market
• Provide maximum power transfer and long-life due to advanced tooth profile and perfect concentricity
• Combination of a high strength base material and exceptionally hardwearing surface

• Teeth made of high-strength steel, for an extra long service life
• Aluminum center section, reduces unsprung masses
• Permanently joined together with high-strength rivets
• At least three times longer service life than other aluminum rear sprockets
• 50 % lighter than steel rear sprockets
• Longer service life of the entire drivetrain kit

• Teeth made of high-strength steel, for an extra long service life
• Aluminum center section, reduces unsprung masses
• Permanently joined together with high-strength rivets
• At least three times longer service life than other aluminum rear sprockets
• 50 % lighter than steel rear sprockets
• Longer service life of the entire drivetrain kit

• CNC milled from high-strength aluminum
• Elegant anodised surface

• CNC milled from high-strength aluminum
• Elegant anodised surface

• CNC milled from high-strength aluminum
• Elegant anodised surface

• Extremely robust spark plug
• Center electrode tip made of iridium
• Reinforced ground electrode (against vibration and breakage)
• Special design with improved anti-sooting characteristic
• Recommended in combination with factory cylinder heads, factor exhaust systems or factory digital box

DID YOU ALREADY KNOW about the special properties of carbon fiber?

• Extremely light: 80% lighter than steel with the same strength
• Exceptionally stable: Four times more durable than aluminum
• Maximum stiffness and tensile strength
• Free from corrosion
• High longterm temperature durability
• Minimal heat expansion
• And not least of all it looks just cool

• Coated neoprene ring
• Simply pulled over the grips

• Developed according to the requirements of our factory drivers
• Less stress when riding
• Objective: comfort AND safety
• Ergonomic contour adapted to the shape of the hand for maximum comfort
• Half waffle grip
• For a secure grip
• Three areas for the metal wire locking
• Version: medium

• Developed according to the requirements of our factory drivers
• Less stress when riding
• Objective: comfort AND safety
• Ergonomic contour adapted to the shape of the hand for maximum comfort
• Half waffle grip
• For a secure grip
• Three areas for the metal wire locking
• Version: soft

• Right grip permanently glued to the throttle grip
• Left grip with aluminum clamping ring for fixing on the handlebar
• Inconvenient gluing and securing with wire no longer necessary

• Specially developed for extreme conditions
• Strap made from high-strength nylon
• Makes it easier to stand your motorcycle up

• High-strength nylon strap
• Indispensable for use on extreme terrain
• Makes it easy to get your bike upright
• Attaches to rear frame

• Recommended for use in conjunction with radial hand brake cylinders
• More distance between brake/clutch lever and handguard

• Excellent weather protection
• Maximum protection against falls, flying stones, branches, etc.
• Indispensable companion for heavy off-road and Supermoto use
• Wide, generous design in combination with sturdy aluminum bracket
• Prevents broken levers
• Made of robust plastic

• Maximum protection against falls, flying stones, branches, etc.
• Indispensable companion for heavy off-road and Supermoto use
• Wide, generous design in combination with sturdy aluminum bracket
• Prevents broken levers
• Made of robust plastic

• Uncompromising race look
• Extremely light
• Open design
• 2-component plastic handguard
• Black middle section = maximum strength for optimum protection
• Colored top and bottom parts = highly flexible under the roughest conditions

• Uncompromising race look
• Extremely light
• Open design
• 2-component plastic handguard
• Black middle section = maximum strength for optimum protection
• Colored top and bottom parts = highly flexible under the roughest conditions
• Mounting not possible with Twinwall handlebars

• Uncompromising race look
• Extremely light
• Open design
• 2-component plastic handguard
• Black middle section = maximum strength for optimum protection
• Colored top and bottom parts = highly flexible under the roughest conditions

• CNC milled handlebar mount with damping rubber inserts
• Gentle on wrists and shoulder joints
• Damping of hard shocks
• Absorption of chassis and engine vibrations
• Additional handlebar damping in horizontal direction
• Optimum steering precision
• Further dampers available in three different degrees of hardness (soft, medium, hard) for individual adjustment

• Handlebar height adjustable to 2 positions

• Made of high-strength aluminum
• Tested in complex and specially-developed test cycles
• Position markings for easy adjustment

• Dimensions: A = 115 mm, B = 806 mm, C = 62 mm

• The Twinwall, in the KTM orange design
• Two handlebars in one
• The exterior ensures maximum resistance to external damage (e.g. fall)
• Additionally hard anodised against corrosion
• The interior, made of a special alloy, is also hard anodised to protect it from damage by the handlebar controls.
• Nylon inserts in the inner tube allow thinner walls
• Very good flex properties
• Comes with handlebar pad

• Dimensions: A = 118 mm, B = 811 mm, C = 74 mm

• The Twinwall, in the KTM orange design
• Two handlebars in one
• The exterior ensures maximum resistance to external damage (e.g. fall)
• Additionally hard anodised against corrosion
• The interior, made of a special alloy, is also hard anodised to protect it from damage by the handlebar controls.
• Nylon inserts in the inner tube allow thinner walls
• Very good flex properties
• Comes with handlebar pad

• Dimensions: A = 104 mm, B = 811 mm, C = 74 mm

• CNC milled from high-strength aluminum
• Elegant anodised surface
• Prevents the hand grips from chafing in the event of a fall

• Already mandatory in many competitions
• Provides optimum protection

• Protects your valuable smartphone from rain, dust or mud
• Touchscreen remains fully functional
• Handlebar pad and smartphone holder in one
• Smartphone cover with velcro fastener attached to the handlebar pad
• Smartphone can be easily removed with its cover
• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• For Smartphones up to 160 x 80 mm
• Comes with two separate protective strips in case the sleeve is not used
• Can also be fitted in combination with the PHDS-handlebar support
• Smartphone not included!

• High-end steering damper
• Maximum control on fast tracks
• Gain in stability at the front wheel
• Fully adjustable
• Well thought-out mounting of the damper enables individual handlebar adjustment
• Reduced weight
• Sensitive response behavior
• High speed DCC
• Developed according to the requirements of our factory drivers

• Optimum 25 click setting range.
• Proven success with the KTM Works Rally Team.
• For use on Enduro MY21 and later (EU Version), the Factory fuel tank cap vent is required

• Smartphone can be easily removed with its cover
• Protects your valuable smartphone
• Optimal solution for quick and secure fastening of your smartphone on the vehicle

• For all 48 mm forks
• Ideal protection for sealing the fork
• For use with a closed fork protector

• For all 48 mm forks
• Ideal protection for sealing the fork
• For use with an open fork protector

• For all 48 mm forks
• Ideal protection for sealing the fork
• For use with an open fork protector

• Protects the lower PDS bearing against dirt permeation
• Extends the service life of the lower PDS bearing

• For all 48 mm forks
• Extra strong film

• For all 48 mm forks
• Extra strong film

• Reduces dirt deposits between engine and skid plate
• Provides better cooling of the engine

• For tank and carburetor bleeding
• Gasoline resistant
• Can only be used for bleeding purposes
• Cannot be used as a connection between tank and carburetor!

• Secure stand for your bike

• Testing, charging and keeping batteries fresh
• Fully automatic and economical battery charging by means of programmed charge characteristic
• Short-circuit protection
• Reverse polarity protection

• Can be used for several types of batteries (Pb, LiFePo4)
• Charging with a specific power control program
• Trickle charge during diagnostic or flashing the vehicle
• Recovery mode for low battery voltage (BMS, battery management system)
• Optimizes battery performance and service life
• Including power supply cable type EU

• The Bead Buddy acts as your third hand when fitting tires
• Holds the tire in the tire bed, thereby making tire fitting much easier
• Simply hook it into the spokes and away you go Particularly recommended for tire fitting with mousse.

• Easy handling and operation
• More safety
• Less wear on the cord
• Made of high quality material
• Cable not included

• 3 x short version 51012092100
• 3 x long version 51012093100

• This clever tool is a must for every motorcycle toolbox
• With it, you can remove dirt from your fork seals effortlessly
• No matter whether it's in the garage or directly at the racetrack this tool extends the life of your seals many times over
• For all 48 mm forks

• Use this to remove the dirt from your last mud battle with ease!
• A motorcycle grip rubber (not included) can be fitted to the grip.

• Makes setting the sag significantly simpler.
• Folding version for easy stowing in the tool box.

• Contains all the most-used bolts and small parts for current Offroad models
• 30 % saving compared with purchasing individual parts

• Comfortable and easy to use
• Fits all standard valves. Pressure display in bar or psi
• Integrated pressure release valve for accurate pressure adjustment
• Disengageable display and work area lighting
• Energy-saving function with automatic cut-off
• Maximum measuring pressure: 11 bar

• Highest quality workmanship
• Including straps

• It withstands a load of 180 kg.
• The total length is approx.200 cm, folded approx.100 cm.

• Practical help when loading the bike or jacking up with the rear wheel lifting device

• Stabilises the motorcycle during transport
• Protects the fork shaft sealing rings and fork springs against damage due to tension belts being tightened too much
• Is clamped between the bottom of the front fender and tyre

• Prevents dirty grips

• Protects the motorcycle from dust, scratches and the like
• The indoor bike cover makes every KTM an eye-catcher in the garage
• Completely dust and dirt-impermeable fabric
• Material with special structure
• The inside is softly padded

• Guaranteed perfect protection in all seasons
• Made of exclusive, pigmented fabric
• Includes practical carrying bag
• Protects the motorcycle from dust, scratches and the like

• Guaranteed perfect protection in all seasons
• Made of exclusive, pigmented fabric
• Includes practical carrying bag
• Protects the motorcycle from dust, scratches and the like

• This mat is already mandatory for many races
• Complies with FIM regulations
• The special material mix absorbs overflowing fuel
• The mat also facilitates the retrieval of tools, screws and other small parts during service work
• Rubberised back

• Size: 170 cm x 100 cm

• Enables secure fastening of the machine
• Protects handlebar and tank from scratches
• Made from durable ballistic nylon
• Load capacity of 280 kg
• With handlebar loops
• With rubberised hooks and carabiner on belt ends

• Provides optimum protection

• Made from high-tensile, durable steel
• Highest quality workmanship

• Double locking mechanism
• Locking cylinder with optimum protection against any attempts at manipulation
• Two keys supplied as standard
• Includes rotating PVC cover that protects the cylinder lock from dirt

• Made of robust material
• Pre-cut stickers

• Elegant look

• Anodised valve caps

• Pre-cut stickers
• Suitable for front and rear wheel rim

• Pre-cut stickers
• Suitable for front and rear wheel rim